Question about 1999 Dodge Intrepid

1 Answer

I need a picture of a Dodge Intrepid 3.2 liter or 3.5 liter

We put a new engine into a 2000 Dodge Intrepid and trying to button up the rest of the work. I need a picture of the right side of a Dodge Intrepid Engine compartment right side towards where the hoses are going into overflow, and engine zoomed in to have detail of all hoses. I would be greatful if anyone could send me a picture.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Dodge Master
  • 552 Answers

You might try mopar magazine web site

Posted on Mar 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do I locate the MAF/IAT sensor on a 2000 Dodge Intrepid?


At the air intake hose to the engine intake manifold.

Mar 27, 2015 | 2000 Dodge Intrepid

1 Answer

Need picture location for 3.2 liter dodge intrepid crank sensor


Look on passenger side at back of engine/transmission housing area.
12_12_2011_1_56_03_am.gif

Dec 11, 2011 | 2001 Dodge Intrepid

1 Answer

What motor fits a 2000 dodge intrepid


You have a 2000 and 2002 listed so the 2000 had options for a 2.7, 3.2, and 3.5 liter 6 cylinder engines the 2002 had a 2.7 and several variations of the 3.5 motor

Feb 22, 2011 | 2002 Dodge Intrepid

1 Answer

I need to know what Antifreeze to use for my 2000 Dodge Intrepid with a 3.2 liter engine


Any good Ethylene Glycol based anti freeze - Prestone, Peak, etc...

Feb 22, 2011 | 2000 Dodge Intrepid

1 Answer

Can a 1999 2.7 liter motor from a dodge intrepid fit in a 2002 dodge intrepid that has a 2.7 liter motor are they the same


yes the engine is the same but you will probably have to use the enginge wiring harness and ecm (or computer) from 1999 intrepid to ensure that there will be no engine performance problems

Jan 10, 2011 | 2000 Dodge Intrepid

1 Answer

How many quarts or oil do my 2000 dodge interpid take???


Most engines four cylinder and six cylinder are going to have a five quart oil pan. Put in four and a half quarts start the engine for a couple of minutes and shut it back off. Check the dipstick. Nine times out of ten you will need to put in the remaining one half of the fifth quart. Dodge recommends SAE 5W-30 oil in the 3.3-liter engine and SAE 10W-30 oil in the 3.5-liter engine. Selecting the proper oil for your engine will ensure that the components of your engine are protected.

Jul 08, 2010 | 2000 Dodge Intrepid

1 Answer

My check engine light says that my primary and secondary cylinders arnt firing, can anyone tell me the firing order so I know what ignition coils to change


Check this firing order for all Intrepid engines...

2001 Dodge Intrepid 2.7 liter DOHC V-6 VIN "R"
or
2001 Dodge Intrepid 2.7 liter DOHC V-6 VIN "U"
or
2001 Dodge Intrepid 2.7 liter DOHC V-6 VIN "V"
or
2001 Dodge Intrepid 3.2 liter SOHC V-6 VIN "J"


5d41214.gif


Hope helps (remember rated this).

Apr 08, 2010 | 2001 Dodge Intrepid

1 Answer

I need to replace the oil pan on my 2002 Dodge Intrepid with a 3.5 Liter engine. What are the steps. Especially with the metal ubber pan gasket.


1.put car on a lift. 2.Drain oil. 3.make sure to have exact oil pan ready with seal in hand. 4.unscrew the bolts in a x fashon. 1-6 3-4 2-5 remove oil pan. 4.Clean all around where the oil pan used to be. 5.Attach new seal and oil pan. hand tighten all the bolts in a X fashon then tighten with a wrench or socket. 6.make sure oil drain plug is on good. 7. put new oil in typically 5 quarts. 8.put car on ground 9. All done.

Sep 02, 2009 | 2002 Dodge Intrepid

1 Answer

2000 dodge intrepid fuel pressure port? i cant find location to check pressure


It's along the fuel injector rails. With the engine not running the fuel line primed should read 55psi and 46psi with the engine idling and the manifold vacuum applied for the 3.3 liter. With the engine not running the fuel line primed should read 48psi and 39 psi with the engine running and the manifold vacuum applied for the 3.5 liter. Good luck and hope this helps.

Jun 23, 2009 | 2000 Dodge Intrepid

2 Answers

Need a 3.5 engine mounting diagram for 97 dodge intrepid and 2.7 engine mounting diagram for 02 dodge intrepid


Google 1997 Dodge 3.5 liter Engine Mounting Diagram. Same for the 2002 engine. I guarrantee you will find it.For some strange reason you would'nt call your local Dodge dealer and ask them where you can go to on the web and locate it.

Jan 06, 2009 | Dodge Intrepid Cars & Trucks

Not finding what you are looking for?
1999 Dodge Intrepid Logo

Related Topics:

521 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...