Question about 2004 Ford Taurus

1 Answer

Car won't start

We have been having problems on ocassion with the car starting there is a keyless entry system on the vehicle but we were sold the car with no remotes for it. every now and then the car won't start and normally if you play with the override button on the lower part of the dash it will work but it is no longer working
please if any one can help.

Posted by on

  • 3 more comments 
  • jcnsherrill Nov 14, 2008

    thought of that first but the car does not have a chipped ignition.

  • jcnsherrill Nov 14, 2008

    yes it does

  • jcnsherrill Nov 14, 2008

    yes it does

  • jcnsherrill Nov 14, 2008

    yes it does

  • jcnsherrill Nov 14, 2008

    it does have a theft light flashing

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 261 Answers

I would contact the local dealer and go with the vopy of my title and registration and have a ignition key made for it and use the new key which will enable to start your car there is a sensor in the plastic part of your key which has to send the right signal in order for the ecm t recogonize and then it will start the fuel and the ignition sys.

Posted on Nov 14, 2008

  • Rabindra Robinson Nov 14, 2008

    does the car has a security light flashing in the dash board while yu are trying to crank

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you turn off an alarm for a 2005 Saturn Ion


Disarming an Armed System/Silencing an Alarm
If system arming has been requested by the keyless entry transmitter, it must be disarmed.
Important: Using the power door unlock switch or manually unlocking the doors does not disable the CTD armed mode. Also, disconnecting the battery or pulling fuses does not disable the armed mode, since the BCM stores the CTD mode status in memory.
?€¢
To disarm the CTD system in arm pending mode, SECURITY indicator flashing and doors open, perform 1 of the following:


-
Press the UNLOCK button on the keyless entry transmitter.


-
Insert a valid key into the ignition and start the vehicle.


?€¢
To disarm the CTD system in the armed mode:


-
Press the UNLOCK button on the keyless entry transmitter.


-
Insert a valid key into the ignition and start the vehicle.


?€¢
To disarm the CTD system when activated, alarming mode.


-
Press the UNLOCK button on the keyless entry transmitter.


-
Insert a valid key into the ignition and start the vehicle.

Jun 24, 2016 | 2005 Saturn ION

1 Answer

How do i find out if vehicle has remote start feature ? all functions on key fob work except engine crank even park lights flash indicating remote start feature . maybe a fuse blown or not in place.


How to check if your GM car is equipped with factory keyless ...

blog.remotesandkeys.com/.../How-to-check-if-your-GM-car-is-equipped...
Aug 25, 2011 - Many, but not all GM vehicles, are equipped with factory keyless entry. ... If not, and you want to have remote keyless entry, go to an alarm shop or Best .... Your other option is to locate the aftermarket receiver under the dash and ... start but need programmed or how can i check if i have remote start installed.

Remote Start ' Vehicle Features ' Official Ford Owner Site

owner.ford.com/.../vehicle-features/.../remote-start-...

Ford Motor CompanyIf your vehicle has automatic climate control, you can configure it to begin operating when you remote start your vehicle. A manual climate control system will run ...

Factory Remote Start Installed? - Chevrolet Forum - Chevy ..


Jan 14, 2016 | Cars & Trucks

1 Answer

How do I reset keyless door entry that is in lock out mode


Viper Keyless Entry Systems

https://www.viper.com/car/keylessentry/
Viper is the industry leader in keyless entry systems. Add the convenience of keylessentry to virtually any vehicle - even vehicles without power door locks!

Alarms, Remote Car Starters, Keyless Entry & Locks - JC ...

www.jcwhitney.com > Audio, Video & Electronics
20 out of 32 products in Alarms, Remote Car Starters, Keyless Entry & Locks ..... ofKeyless Entry & Car Alarms allow you to lock and unlock power door locks.
How to program your keyless entry keypad - Ford Ownerhttps://owner.ford.com/.../locks.../how-to-program...Ford Motor CompanyDiscover how to lock and unlock your doors and how to program memory settings that will adjust seats & mirrors for each driver.SecuriCode™ Keyless Entry Keypad - Ford Ownerowner.ford.com/.../locks.../securicode-keyless-entr...Ford Motor CompanyLearn how to set a 5 digit SecuriCode on the Ford keyless entry keypad. ... Sign out. Register/Sign In · Your Vehicle. Service & Maintenance. Service & .... vehicle's SecuriCode keypad to lock and unlock your doors without having to use a key. ... Thekeypad will go into an anti-scan mode if you enter the wrong code seven ...How Programming Your Keyless Entry Can Make ... - Ford Life

Jan 08, 2016 | Cars & Trucks

1 Answer

My1998 explorer just quit it won't start i got new


The 98 explorer is equipped with a power surge system to protect internal vehicle wiring, what this means is that if there is a short in the vehicles wiring the alternator will disengage. A way to tell if it is faulty wiring is to pull all the fuses out of the fuse block and try to start it if the engine turns over the problem is internal wiring. If not then you have to put all the fuses back.

Jan 31, 2013 | Cars & Trucks

1 Answer

How does key fob work


Depending on the specification of your vehicle, the FOB generally serves one (or both) of the following functions:

1) Communicate with the vehicle's Keyless Entry system (operates central locking).
2) When inserted into the ignition, the transponder within the key will communicate with the vehicle's Body computer (BEM) to validate entry, before disengaging the immobilizer - allowing the vehicle to start.

When the key fob fails, you may lose functionality of the above systems.

Keyless entry failure - usually due to flat battery in the fob. Reprogramming of keyless entry can be done without dealership assistance.

Transponder/Immobilizer failure - this requires the key fob to be re-programmed by your local dealership.


Hope this helps....

Nov 28, 2011 | 1998 Toyota Camry

1 Answer

2004 Hyundai Elantra won't start, emergency flashers keep blinking, can't shut off, lights dim, can't jump start, clicking from under dash from relays. What could it be?


The 'Keyless Entry & Burglar Alarm System" is activated. You must 'Disarm' the system using the Keyless Entry Remove (Key Fob) to "Reset" the system. The reason the engine won't start is due to the burglar alarm - it has a "Starter Kill" circuit which is activated when the alarm is activated. The alarm must be DEactivated to DEactivate the 'Starter Kill' circuit.
Another way to start the engine is to get in the car, put the key in the ignition and turn it to 'ON" and wait 3 to 5 minutes until the emergency flashers stop/turn off. Afterward, you should be able to start the engine. NOTE: This does NOT reset the burglar alarm. It will go off again when you enter the vehicle without using the remote/key fob.

Sep 06, 2011 | Hyundai Elantra Cars & Trucks

1 Answer

I want to add a keyless entry to my 1996 Ford Explorer XLT 2WD 4.0L and also a remote start. It does not have any type of remote for the vehicle right now I.E. alarm system. Is it possible to do a remote...


This is possible with almost any vehicle, especially ones with power locks. I installed keyless entry on someone car before on my own. Took about 3 hours or just take it to a local shop. Its a pretty easy install for anyone who is mechanically inclined.

May 06, 2011 | 1996 Ford Explorer

1 Answer

Would anti theft cause car to quit


Sounds like a bad ignition switch have ur body control module checked for codes if u have a B2960 and or B3033 then replace the ignition switch.

SECURITY
If your vehicle has the remote keyless entry system, this feature allows you to select the method used to arm the vehicle's security system. When SECURITY appears on the display, press the reset button to scroll through the available settings:
* RKE (Remote Keyless Entry) (default): The content theft-deterrent system will arm when the lock button on the remote keyless entry transmitter is pressed or when the power door lock switch is pressed.

* PASSIVE: The content theft-deterrent system will arm itself 60 seconds after the ignition has been turned off and all of the doors have been closed.


Hopd this help (remember comment and rated this).

May 04, 2010 | 2005 Chevrolet Cobalt

1 Answer

Had car starter installed now the passlock light stays on. He took the key out while the vehicle was running. They disconnected the battery and hooked back up but that did not work.


Important: Using the power door unlock switch or manually unlocking the doors does not disable the Content Theft Deterrent (CTD) armed mode. Also, disconnecting the battery or pulling fuses does not disable the armed mode, since the body control module (BCM) stores the CTD mode status in memory.
• To disarm the CTD System in arm pending mode, SECURITY indicator flashing and doors open, perform one of the following: - Press the UNLOCK button on the keyless entry transmitter. - Insert a valid key into the ignition and start the vehicle. • To disarm the CTD System in the armed mode: - Press the UNLOCK button on the keyless entry transmitter. - Insert a valid key into the ignition and start the vehicle. • To disarm the CTD System when activated, alarming mode. - Press the UNLOCK button on the keyless entry transmitter. - Insert a valid key into the ignition and start the vehicle.

Nov 04, 2009 | 2005 Chevrolet Equinox

1 Answer

Keyless entry did not work


If I am not mistaken, this is a safety feature. You manually locked the doors which told the computer you could possibly be in danger and someone on the outside has your key. After you unlocked and started the vehicle it reset the mode and that is why it works now without a problem. You can test this by manually locking it again and trying the keyless entry. If it does not work, then unlock and start the vehicle and try again. If it does work have the dealer check it out as it could be the receiver for the keyless system.

Sep 30, 2009 | 2004 Land Rover LR3

Not finding what you are looking for?
2004 Ford Taurus Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...