Question about 1998 Mercedes-Benz C-Class

2 Answers

Code is there with serial number but the radio does not accept

I removed the battery and reinstalled. the radio mecedes type of mercedes elgance 180 c 1997 made does not accept the code. what should I do.
note. the vcode and the serial number card are with me

Posted by on

  • elmukhtarh Nov 18, 2008

    how can I search for the channels and fix them in the specific channel number

  • elmukhtarh Nov 19, 2008

    thanks alot

    the problem sorted and the code was incorrect

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thanks alot for your concern

when I open the radio the panel does not play the serial number. where can I find the serial number. should I remove the radio from the place and look for it.

note I have the serial number witten in a card. the serial number is BE 1150 R 2005437

Posted on Nov 15, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

Make sure the numbers match. The serial number is etched into the housing of the radio-starts with S/N ###etc. If you are unsure, write down the complete S/N off the radio housing and call a dealer-they will not charge to look up a radio code-it only takes a minute. If they give you a different number, then your head unit has been replaced at some point and your current card is no good. If they give you the same number, then try one more time and press seek when done. If it still does not accept it, then there may be an internal radio problem.

Posted on Nov 14, 2008

  • Ryan Casper Nov 20, 2008

    Yes. You will need to take the radio out of the dash-you will need a set of radio keys for this-should be able to buy them at a local parts store. Pull the radio head unit out and look for S/N etched into the housing of it.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Had to change battery on 2002 mercedes e430 and i have the radio code but it wont accept it what can i do


try undoing eath again on battery leave for harf an hour then reconnect the earth lead and try again.

Feb 22, 2014 | 1999 Mercedes-Benz E-Class

1 Answer

Radio code


  • The 4-digit code for your radio is listed on the two radio security cards supplied with the vehicle.
  • Enter the code by using the pre-set buttons numbered 1 to 6 and a "beep sound" occurs.
  • If the code is not properly entered, then begin the code entry again, starting with the first digit. If the code is not properly entered in three successive attempts the radio will not accept any entry until the radio has been left on for one hour (the radio display will show the word 'WAIT'). After one hour in the 'on' position the radio will accept three additional entries.

Note: Should you lose your radio security cards, contact your Jaguar Dealer, who for security reasons will require proof of vehicle ownership.

I hope this info helps!

~subyguru~

Mar 31, 2012 | 2000 Jaguar S-Type

1 Answer

I have an 87 Mecedes 420 , Last owner installed a


may take to radio installer familiar with mercedes ,as alot of vehical info , data for diagnosis goes threw factory installed radio ,

Jul 26, 2010 | 1987 Mercedes-Benz Mercedes Benz 400 Class

1 Answer

I'm trying to remove the car battery in my 1991


if there is nothing going over the top of the battery.. then its just sticking to the car...give it a little yank

Jul 20, 2010 | 1991 Mercedes-Benz 560

4 Answers

How do I reset my ml320 stereo code


what is radio code 4 a 2000 mecedes ml 320

Sep 09, 2009 | 2007 Mercedes-Benz ML320 CDI

1 Answer

Lost Car radio code after removal of battery head model ML320 1998 version. Serial Number Radio -103725 Label Number: MIC 408013 Reference Number: LP 29102 Made Bose


Real easy. Go to the MB dealership, proceed to the parts department give them the VIN of your car(I used my insurance card) ,they type in your VIN, few seconds... they hand you over a post-it w/ your code.

Go to your car punch in the code and make sure you press OK.

Your done ...radio works again.

P.S. I have a 1999 e320

Apr 11, 2009 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi

1 Answer

Original correct Mercedes verified code fails


Disconnect and reconnect the battery again and try again.

Good Luck

Mar 26, 2009 | 1996 Mercedes-Benz E-Class

1 Answer

1992 mecedes benz 500 sel


hi, pls fine your radio code,like i.d. color gray,ty

Jan 12, 2009 | 1992 Mercedes-Benz SL-Class

5 Answers

RADIO CODE


go to Mercedes dealer give them your VIN, ask them to look on the VMI for the radio code. If the radio is original, that code will unlock the radio. If it has been replaced or the code does not work you willhave to pull out the radio and give the dealer the serial number to get the correct code.

Jun 08, 2008 | 2001 Mercedes-Benz E-Class

Not finding what you are looking for?
1998 Mercedes-Benz C-Class Logo

306 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

yadayada
yadayada

Level 3 Expert

77514 Answers

Joseph Prosser

Level 3 Expert

772 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...