- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
TROUBLESHOOTING P0011 The pcm has determined that the voltage signal from camshaft "A" position sensor in bank 1 indicates inadequate perforemce or a timing over advanced condition. (Bank 1 identifies the location of cylinder #1, while bank 2 identifies the cylinders on the opposite bank)
It is hard to repair. I assume that the base of hinge became unattached from either the chassis (hat shelf), or the trunk lid.In either case, welding is required. Furthermore, if your car is equipped with torque bars to keep lid open, instead of hydraulic bars, those are hard and dangerous to install.
it has a timming chain,which if it hasnt broke i wouldnt be to concerned about it unless youve reached 200,000 they usually outlast the car its self chains are very hard to bust,but if you decide to go forward with this the chain runs any where from 36.00 to 86.00 any where in between i suggest you not pay more then 60.00 4 the chain hope this helps you im 100% its a chain
you will need new upper timing chain and sprockets. Common problem on altima your year. Nissan has TSB for it. First they had us remove the upper timing chain guide, but after that, they had us replace all top chain components.