Question about 2002 Lincoln LS

2 Answers

Where is the OBD Connector located on a 2002 Lincoln LS

Check Engine light is on and I am trying to have it hooked up to a diagnostics computer and they can not find where to hook it up?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

It is on the drivers side, just past the bottom of the knee bolster on the right side, it is flush with the bottom, that is why it is hard to find

Posted on Jan 27, 2009

  • rojba2 Feb 21, 2011

    Yes, this was the right answer for a 2002 lincoln LS, Thank you !!!!!!

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 261 Answers

Almost all american made vehicles the obd2 connector is located under the dash board most of them near the drivers side som in the middle of the console and some on the passanger side, however if a tech can first feed the info of the car manualy into his scanner using the VIN code the scanner will be able to tell exactly where the hoo up is located.

Posted on Nov 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to factory reset the main motherboard computer on a Lincoln Navigator 2000


If you have a check engine light lit , there is a DTC - diagnostic trouble code set in the PCM / ECM -OBD 2 engine management system computer . If you don't fix the problem the light will not go out , you need to have a scan tool hooked up to check codes an go from there !

Apr 08, 2015 | 2000 Lincoln Navigator

1 Answer

Need my Liberty to pass smog I recently had codes po445 and po442, will this be a problem for passing smog if check engine light isn't on? Not sure if problem was resolved with new gas cap.


if your check engine light isn't on, they will still hook up a diagnostic code tester to your vehicle to see if the computer has picked up any problems, if the computer has picked up a problem, and you fixed the problem, then you can have the code removed from the system, with a diagnostic code tester.

May 16, 2011 | 2002 Jeep Liberty

1 Answer

My check engine light has come on. I went to auto zone and they hook up the diagnostic computer. The code came back as bank one and bank two. I replaced the mass air flow sensor but when plugged in my...


it could be a bad one take it back and request a new one also you could try un hooking the
battery for 5min so it clears the computer then hook it back up ant see if that works for you

hope this helps you
good luck
bob

May 11, 2011 | 1998 Ford Explorer

1 Answer

My check engine light came on then after that the car doesn't accelerate rapid enough...


It could be a sensor. Most likely and commonly unless your fuel filter is plugged. Computer Check/Service engine lights are connected to the computer so any time anything electrical or electronical goes faulty, your check/service engine light will come one. You should have the car's computer hooked up to a code reader or diagnostic scanner which many part stores will test for free. This tester can tell you what's wrong with the car as well as shut off the service engine light.

Dec 28, 2010 | 2006 Honda Accord

1 Answer

Dash icon in chevy balzer 2000


It is a Check Engine Light, meaning youe ECM (Computer) in your car has found a fault (Trouble Code) with a component or sensor in your engine. You will need a OBD II Diagnostic Scanner to be hooked up to your Diagnostic Port located inside your vehicle under the driver's side footwell to scan the stored codes so that your mechanic can determine a solution to the car's problem. You can go to your local AutoZone store and they can hook up a scanner and read your trouble code for free so you have an idea what is wrong with your vehicle. You can click on the link below for more detailed information.

http://www.obd-codes.com/trouble_codes/

Jun 03, 2010 | 2000 Chevrolet Blazer

1 Answer

The check engine light is on. What do I do?


There could be a hundred causes for a check engine light. First step is to hook up a computer scan tool and see what codes the computer has. The next step depends on the codes. You don't have any other choices when it comes to inspectors.

Dec 03, 2009 | 2001 Honda Odyssey

1 Answer

Check engine warning light is on


the check engine warning light monitors many different types of problems that can be obtained by hooking you car up to its computer to a diagnostic to find what codes it is reading to ttell what is wrong with your vehicle

Sep 25, 2009 | 1999 Buick LeSabre

1 Answer

Check engine light on daytime driving light indicator flashing


hi..
first of all it means that u have a problem some where on the suv the only way to find the problem is to hook a diagnostic computer and see what the code is u will have to take the car to a shop who works on isuzu and im sure they can tell u what code it is and whats wrong or u can take the suv to advance auto parts and they can hook there machine to it for free and tell u the code good luck

OK, the best action now would be to scan the ecu for any trouble codes that may be stored at this point with a diagnostic computer. this action will describe the issue concerning the check engine light and, it will also direct you to the location of the failed sensor that may be damaged at this time.

In most cases, this light will illuminate if a vital sensor has failed to register a signal for a short time or, if the sensor circuit is open.


thank u
rate me

Jul 24, 2009 | 2005 Chevrolet Equinox

1 Answer

My isuzu axiom 2002 model indicates check engine what do i do?


check engine light indicates that the computer in your vehicle has sensed a electrical problem pretaining to the performance of the engine usualy a diagnostic scan would determine the actual cause, vehicle has to be hooked up to a diagnostic tools.

Nov 24, 2008 | 2004 Isuzu Axiom

2 Answers

Check engine light


My check engine light came on. i took my car to autozone and they will hook it up to a diagnostic machine to let you know the code that the engine computer is sending. In my case the thermostat had went out, so it needed to be replaced. just an idea.

Aug 27, 2008 | 2006 Chevrolet Cobalt

Not finding what you are looking for?
2002 Lincoln LS Logo

Related Topics:

3,196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

74192 Answers

fordexpert

Level 3 Expert

5414 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...