Question about Chrysler LHS

1 Answer

01 CHRYSLER LHS P/S HAS NO ASSIST AT IDLE - REPLACED PUMP AND STEERING RACK WITH NO RESULTS

Posted by on

  • sheenalynnlu Nov 23, 2008

    I have had my Chrysler LHS (1999) at a dealership for over a year with power steering problems. They gave it back to me and said they couldn't fix it because they can't figure out what it wrong. The whole power steering system has been replaced and consists now of all new parts but I still cannot steer it properly when it is at a slow speed. This is my only car, I'm pregnant, I work out of town, and I cannot afford a new car! What do I do?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 659 Answers

Has anyone checked the ball joints to see if they are binding? the steering must be removed at the wheels and then checked for binding

Posted on Nov 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How is the power steering brackets attached?


Chrysler used the Chrysler LHS nameplate for the following vehicles:
so what is it? really. sure 14th gen
The New Yorker came standard with the 3.5 L EGJ which produced 214 hp (160 kW)
and guess what engine type dictates bracket types. so what engine.


from the P/S pump to the engine .
you never said what?
the pump or the rack or the searing gear box.
????
all have brackes.
login to
alldata.com
or
why not just use, Chrysler tell you this, on line.
like this, ever seen this , 100 more... like it.
im a mopar guy, (love em)
USA< im USA< are YOU? and if not why not SAY.

http://www.factorychryslerparts.com/productSearch.aspx?&ukey_make=1061&ukey_model=0&modelYear=1994&ukey_category=0&ukey_driveline=0&ukey_trimlevel=0&ukey_modelRange=0&isOnSale=0&searchTerm=

Jun 15, 2014 | 1994 Chrysler LHS

1 Answer

1996 Chrysler LHS stearing rack


On a 17 year old car

I would say they both need replacing,
if original

I personally don't see either item making
it that far or long a time

Feb 19, 2013 | 1996 Chrysler LHS

1 Answer

My 1997 Chrysler turns LHS turns off when I turn to the right (at 10mph) and won't turn back on until turn to the left again.


look inside the steering column for a bad wire the switch on the rack if for turing th eac of when tight turning

Sep 26, 2012 | 1997 Chrysler LHS

1 Answer

My battery died and my key is now stuck in ignition i replaced battery and still cant get it out


I have a 97 LHS that does the same thing. If its the steering colum gear shifter stick it stiffens up over time. While putting car in Park......assist it by pushing the stick towards the dash to make sure car is fully in park.

Aug 22, 2012 | 1997 Chrysler LHS

1 Answer

Power steering hard to turn at idle only on 2000 chrysler lhs.power steering rack and pinion and pump already replaced.


start with checking your tire pressure if thats ok check the belt for proper tension and fluid level and last that your idle speed is set correctly while the vehicle is idle in drive not idle in park hope this helps.

Jan 03, 2011 | Chrysler LHS Cars & Trucks

1 Answer

My chrysler voyager 2lt got problems with power steering fluid full but making whining noises and very heavy


Belts tight? If so check your steering rack unit for leaks (wetness) around ends of seals.Also where rack is mounted for loose bushings that rack mount in. Look sort of like stablizer bushings. Possible causes would be bad Steering Rack or pump itself.

Jan 24, 2010 | 1999 Chrysler LHS

2 Answers

Does the rack and pinion need to be removed to replace power steering hose?


not normaly they bolt to the steering rack so you dont need to take the rack off

Oct 26, 2009 | 2000 Chrysler LHS

2 Answers

Power steering fluid leaking somewhere. not from reservoir. vehicle is a 1997 Chrysler LHS 3.5L


It is either a hose, the rack, or the P/S pump. you will need to look with your eyes to find it.

Aug 13, 2009 | 1997 Chrysler LHS

1 Answer

Power steering leak


Depends on the part to be replaced. The pump is pretty straightforward with the correct tools and costs about $60 to $100 if you do it yourself (I own an Intrepid, similar to the LHS and I work on it a lot) . If it's a metal hose, this is going to be about $30 to $50 or more and will need a flare nut wrench, along with other hand tools. If this is attached to the steering rack, you may have to move other parts out of the way. This is not a hard job either, but could be time consuming and be careful not to cross thread the fittings.

Jun 21, 2008 | 2000 Chrysler LHS

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...