Question about Cars & Trucks

2 Answers

What position must the 4wd switch be in when on the high (N,4H,4h or 4L

Posted by on

  • 1 more comment 
  • marcampbell2 Nov 13, 2008

    yes i am sure only N away from the 4wd options. 2006 suzuki escudo

  • arush4WD Feb 17, 2009

    Put the vehicle in 4WD and now it is stuck-tried shifting it at a stand still and moving...The stick shift won't budge! help...

  • mike harris
    mike harris May 11, 2010

    HI marcampbell2, what kind of vehicle is it my friend? and in your post you have N-4H-4h-4L are you sure there is not a 2H in there somewhere :)

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 94 Answers

Hello marcampbell2, your escudo should be in 4H for highway use,the N position is used for towing purposes.take care and drive safe

Posted on Nov 14, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

4wd in high so 4H

Posted on May 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why trasfercase does not transfer from 4LLock to 4HLock or 4H when changing the mode??


Perhaps the gear trains are 'in a bind' and the electric/vacuum actuators cannot exert enough force to shift them.

Try driving at slow speed in a straight line on soft surface (not concrete) for 100 feet, then back up in straight line. The idea is to allow any residual loads from the LOCK position to dissipate and unload the shifters.

Sep 13, 2014 | Cars & Trucks

1 Answer

Suzuki grand vitara 2010 normal driving 4wd position


normal driving 2h if using 4wd use 4h to drive on roadway 4l is a lower gearing that is usually used to get thru something slowly than if try to drive normal in low can damage motor or transfer case read ur manual it explains how and when it is advisable to use ur 4wd

Mar 31, 2014 | 2007 Suzuki Grand Vitara 4WD

1 Answer

How do I turn 4wd on?


    • 1 Start your Dodge truck's engine.
    • 2 Turn the electronic transfer case from "2WD" to "4WD Lock" to engage the high range 4WD, if the dodge truck is equipped with an electronic transfer case; otherwise, shift the transfer case lever from "2H" to "4H." The electronic transfer case is located on the instrument panel and is marked with "2WD," "4WD Lock" and 4WD Low." The lever-equipped transfer case is located to the right of your leg and is marked with "2H," "4H" and "4L."
    • 3 Shift the transmission into "Neutral" while the vehicle is either stopped or rolling at 2 to 3 mph to begin engaging in the low range 4WD. Turn the electronic transfer case to "4WD Low," if the Dodge truck is equipped with an electronic transfer case; otherwise, shift the transfer case lever from "2H" or "4H" to "4L."
    Tips & Warnings
    • Indicator lights will come on and alert you that your vehicle is in either the high or low range of 4WD.
    • Do not engage in the low range of 4WD drive if the transmission is in gear; you must shift to "Neutral" first.
    • Many Dodge trucks allow you to shift from 2-wheel drive to the high range of 4WD at up to 55 mph--consult your truck's manual to ensure that this is possible. Do not exceed 55 mph while engaged in the high range of 4WD. Do not exceed 25 mph while engaged in the low range of 4WD.
    • Do not engage in 4WD unless you are on slipper or rocky roads.

Sep 02, 2011 | 2005 Dodge Dakota

1 Answer

HOW TO SHIFT TO 4 WHEEL DRIVE


Hi - Here is instruction how to do.

From N to 4H

Stop the vehicle completely, place the

transmission in "N" (Neutral) and depress

the brake pedal and the clutch pedal fully

(if equipped), then push in and turn the

switch to shift into "4H".

From 4H to 4H LOCK

You can operate the transfer switch either

when the vehicle is stopped or while the

vehicle is moving.

Position the front wheels straight ahead

and turn the switch to shift into "4H LOCK".

If the vehicle is moving, we recommend

that the speed be less than 100 km/h (60

mph) during this operation.

NOTE:

• When shifting between the transfer

switch position and the transfer gear

position is unmatched, all 4WD indicators

will blink and the buzzer will sound.

• If it is difficult to shift between "4H" and

"4H LOCK" while the vehicle is moving,

try accelerating and decelerating your

vehicle several times after turning the

transfer switch. Be sure to wait until traffic

conditions allow you to accelerate and

decelerate safety before using this procedure.

From 4H LOCK to 4L LOCK

Stop the vehicle completely, place the

transmission in "N" (Neutral) and depress

the brake pedal and the clutch pedal fully

(if equipped), then push in and turn the

switch to shift into "4L LOCK".

From 4L LOCK to 4H LOCK

Stop the vehicle completely, place the

transmission in "N" (Neutral) and depress

the brake pedal and the clutch pedal fully

(if equipped), then push in and turn the

switch to shift into "4H LOCK".

From 4H LOCK to 4H

You can operate the transfer switch either

when the vehicle is stopped or while the

vehicle is moving.

Position the front wheels straight ahead

and turn the switch to shift into "4H". If the

vehicle is moving, we recommend that the

speed be less than 100 km/h (60 mph) during

this operation.

NOTE:

• When shifting between the transfer

switch position and the transfer gear

position is unmatched, all 4WD indicators

will blink and the buzzer will sound.

• If it is difficult to shift between "4H" and

"4H LOCK" while the vehicle is moving,

try accelerating and decelerating your

vehicle several times after turning the

transfer switch. Be sure to wait until traffic

conditions allow you to accelerate and

decelerate safety before using this procedure.

From 4H to N

64J209

Stop the vehicle completely, place the

transmission in "N" (Neutral) and depress

the brake pedal and the clutch pedal fully

(if equipped), then push in and turn the

switch to the mark (1) at the left of the "N"
position, and hold the switch in this posi-

tion for 5 seconds until the "N" indicator

blinks, then turn the switch to the "N" position.

When you turn the transfer switch to the

"N" position, "N" indicator will come on with

the buzzer sound.

CAUTION

• Be sure to stop the vehicle completely

before operating the transfer

switch to shift between "N" and

"4H", or between "4H LOCK" and

"4L LOCK".

• Do not shift between "4H" and "4H

LOCK" unless the front wheels are

in the straight-ahead position and

we recommend that the vehicle

speed be less than 100 km/h (60

mph).

Do not operate the transfer switch

while tires are racing.

• Do not operate your vehicle in "4H

LOCK" or "4L LOCK" on dry, hard

surfaces.

(Continued)

CAUTION

(Continued)

• Do not operate the vehicle while a

4WD mode indicator is blinking

except when shifting between "4H"

and "4L LOCK".

If you operate the vehicle while a

4WD mode indicator is blinking, a

buzzer will sound and the transfer

will shift to "N" (Neutral) to prevent

transfer case damage.

In this case, use the following procedure.

1) Depress the clutch pedal fully (if

equipped) or shift the automatic

transmission gearshift lever to the

"N" position.

2) Turn the transfer switch to the

position previously selected.
3) Operate the transfer switch again.

Feb 01, 2011 | 2007 Suzuki Grand Vitara 4WD

1 Answer

How do I use the 4 wheel drive on my Ford Ranger XLT 2.5 TDi 2004


4L only to be used in extreme condtions
N
4H for off road/snow/ice
2H - normal driving

when switching to 4H vehicle must be stationary, as when changing from 4H to 4L
but it is possible to change from 4H back to 2H while in motion.
when 4wd is engaged a lamp will illuminate on dials telling that the hubs are free wheeling, when changing back to 2H you must press corresponding switch to dis-engage this function

Jan 08, 2010 | 2004 Ford Ranger

1 Answer

99 GMC Sierra 4X4 kicks out


Check/change transfer case fluid and check the wire connection to it.

Mar 25, 2017 | 1999 GMC Sierra

1 Answer

Check 4wd light on


just found this worked a trick..mine stuck for two weeks in 2wd

A mere 2,400km into the life of my 07 Rodeo TD 4WD, I used 4L for about 2km of medium-steep/slippery track. After stopping and selecting 2WD the 'Check 4WD' light appeared, meaning I was stuck in 2WD for the rest of that trip. Luckily I was able to complete the trip in 2WD without incident.

The dealer blamed me for 'not following the instructions in the manual' (utter codswallop), 'fixed' it, and very reluctantly gave me a scribbled set of instructions on resetting the system, which I've included below.

When I suggested that these instructions should be included in the manual, the response was 'not necessary if owners use the system correctly'. More cods.

Here's how to reset it:

1. Ignition off, hold all 3 buttons (2H, 4H & 4L) in together

2. Switch ignition on to 'reds' position (last position before start)

3. Hold in this state for 30 seconds

Hope this may be of use !!

Dec 12, 2009 | 2004 Isuzu Rodeo

1 Answer

98 expedition xlt wont engage in 4h or 4l. the awfs light is on when switch in that position, none of the others do (eg. 4H or 4L) the vehicle has not been in 4wd in a few months. last time 2low engaged...


one the transfer case there is a motor on the back side of the transfer case. most of the time that goes bad. if you don't have a trouble shooting guide with a wiring diagram, best to have a mech have a look at it. most of the time they rust and stick if not used a few times a year. best of luck.

Aug 06, 2009 | 1998 Ford Expedition

1 Answer

4wd instructions for 1995 jeep cherokee


you don't have to be in neutral to go to 4H , but you do have to be in neutral to go into 4L

Dec 21, 2008 | 1995 Jeep Cherokee

1 Answer

4 wheel drive selection


4-wheel high or 2 wheel if it has it

Nov 13, 2008 | 2006 Suzuki Vitara

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

995 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...