Question about 2001 Chevrolet Silverado 1500

1 Answer

Delay and low range wiper setting do not work on my 2001 1/2 TRK

I parked my truck in the evening during heavy snow. I left my delay wipers on. The next morning I started my truck to warm it up and the delay wipers were on. Now, my wipers will only work on high. Any ideas?

Posted by on

  • 2 more comments 
  • buckhill Dec 23, 2008

    Wipers Froze in the ice

    now i only have High Speed

    no delay or low speed

    Mine is a 2500HD

  • Anonymous Mar 20, 2014

    Low torque accelerating up hill and 2 to 3 seconds delay on acceleration.

  • Anonymous Mar 25, 2014

    turn on wipers in delay and sometimes they jump,skip and freeze.Turning them off and back on sometimes works and sometimes they don't come back to park position.

  • Anonymous Mar 29, 2014

    works fine on high and low speed but not on delay ?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

Chevy has had Problems with the Wiper Motors on these Trucks for a Long time now. On some Models they Issued Recalls. On My 95' I just Replaced the Wiper Motor and have had NO Problems Since!

Posted on Dec 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My windsheild wipers stop in the up position on the delay setting but park all the way down when turned off. How do I fix this


You will need to diagnose this with a multi meter....on dark green terminal d at the wiper pulse board, with the wipers on any delay position, you should be reading .0005 Amps and 12 Volts and at the same time on the delay position one click below low(the fastest delay speed) you should be reading .0003Amps and 12V on terminal E gray wire, The purple wire (terminal C) should have 12V on high speed only. The yellow wire (terminal B) should have 12V when the key is on and the black wire (terminal A) should always be grounded....check all of that and we should be able to find your problem.
The Amperage should change on terminal E (the gray wire) with each position on the switch but the change will be very small. i.e. the first speed (longest delay) will read .000017 A, the second setting .00004 A and so on. Check that and let me know...(by the way, amps are checked in series with the connector so unplug it, place one probe in the connector and the other in the motor plug terminal. )

Sep 30, 2016 | 2004 Pontiac Montana

1 Answer

Delay wipers not working


repalce wiper motor bad internal contacts

Feb 15, 2014 | 2002 Chrysler PT Cruiser

1 Answer

1999 Dodge Intrepid with flickering Dash Lights and Wipers Delay Problems


the dash lights is a lose ground or power connection the wipers could be a couple things there is a wiper relay that may be going bad or the wiper motor is going bad could even be both

Jun 03, 2013 | 1999 Dodge Intrepid

1 Answer

2001 grand marquis windshield wipers runs in high nothin else wont go in park either


If you are having problems with the wipers not wanting to park, that is usually the park switch inside the wiper motor. The low and interm speed settings could be the delay module which could also affect park.
You may need a shop manual to troubleshoot the circuits.

Dec 15, 2012 | 2001 Mercury Grand Marquis

1 Answer

In delay cycle wiper hesitates


Hi,
The hesitation of the wipers in delay cycle is normal. You can twist the nob on the end of the arm to speed up or slow down the hesitation.
If you are driving in a light mist and the wipers ran at normal speed most of the time the would be wiping a dry windshield. Chattering and bouncing. With the delay set at the right speed the wipers only go on every so often, No dry chattering. In a full rain just twist the knob past the delay cycle to get low or high speed from the wipers.
Hope this helped you.
Wayne

Feb 21, 2011 | 2001 Buick LeSabre

1 Answer

Delay wipers don't work.


Try making sure the connection is good.
If it is then you should try replacing the wiper switch.


Brandon Bird

Jan 25, 2009 | 1999 Jeep Cherokee

2 Answers

Windshield wipers not parking


The problem could be a bent parking pall bracket. This is usually caused when you wipe snow from windshield using the wipers instead of brushing off. You need to remove both wipers and the cover from the drivers side. Remove the cover over the wiper motor assembly (held by a plastic button). On the right side of the wiper mechanism is a small tab (part of the wiper bracket). This tab needs to be straight for the wiper park pall to rest against.Carefully hammer this tab straight (or you may have to replace bracket, big job) Then cycle the wiper and you will see the assembly return to park position. Re-install all parts in reverse order.
Hope this works for you.

Jan 15, 2009 | 2003 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

720 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63574 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...