Locate the rad drain plug, it depends on what motor you have, it'll either be on the bottom of radiator (you might have to move the cover to get at it) or in the rear of the engine block. if you get at them i'd simply just remove the lower hose from the radiator. just make sure car is compleatly cooled down first. drain all fluid and flush in some new.
SOURCE: 2006 CRYSLER
I'm not familiar with when Chrysler stopped using the brake safety system or if they did on that model. If you are pressing the brake pedal and the shift release lever is not releasing the shifter, you will need to open the console and visually check to see if when you press the shift release button the locking pin actually raises to release the shifter. If this occurs then you need to have the transmission inspected and the braking system. All of this is on the assumption that your shifter is mounted on a center console. If it is column mounted you need to have the transmission inspected. One other thing you can try, Even though the shifter is console mounted you can still make selection by turning the column just above the dashboard to shift between the selection. I know it sounds strange but sometimes this does work indicating that the problem is truly the shifter assembly.
SOURCE: how can I open the trunk if the battery is down on a 2006 crysler
This happened to me. You can attach jumper cables under the hood that will allow you to pop trunk. Next option, fold down rear seats and use the manual trunk release located in trunk itself.
SOURCE: how to replace a heater core
This is a big job. the complete dash board must be removed with the steering column and air bag etc,everything comes out to get to heaterbox, then remove the heaterbox and open it up and remove the heatercore.this take me about 7 hrs. including recovering and recharging the ac system.
597 views
Usually answered in minutes!
×