Question about 2000 Dodge Durango

1 Answer

2000 Durango, Headlights went out (both), turns, hgh beams work

I have a 2000 Dodge Durange, and the headlights just went out on the vehicle. I am not sure whats wrong. All the other lights work, interior, tai, brake, turns, high beams, fogs, etc. Its just BOTH HEADLIGHTS are out? Could both bulbs go bad at the same time? WHere is the fuse, because i think i found it in the engine compartment, but there are 2 fuses i think, one for right side and one for left side, and they BOTH are GOOD. Could it be the switch itself?

Posted by on

  • watkins1004 Jan 20, 2009

    I have the same problem and i'm going to the part store now to buy a new head light bulb to see if it works.



    watkins1004


  • Anonymous Mar 22, 2014

    I have 55 watt HID kit installed. The right side (passenger) headlight turns off while left side (driver) functions normally. i switched the sides of the HID kits to make sure it wasn't that. I think either the H13 connector is bad or there is a ground issue. does anyone have any ideas on what might cause this?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 512 Answers

If the high bam headlamps work it is not the headlamp switch itself but it could be the multifunction switch

Posted on Nov 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 Dodge Durango and I keep blowing the fuse for instrument lights and tailights


hello same pronlem with my 98 durango but right turn signal!

what it was is the 4 pin connector for the tow package had the insulationripped off them i guess whe backing out of a steep driveway it sxrapped! so the headlights, turn signals, and brake circuits where grounding out! quick fix!

just cut and capped that mess!

good luck

Mar 02, 2013 | 2000 Dodge Durango

2 Answers

My durango headlight will not work on the right side


Well the turn signals are a different circuit.
Usually the common problem with one headlight is the ground circuit.
Both the high and low beam use the same ground. I would check for power for each circuit and a good ground at the light socket.

Dec 04, 2012 | 2002 Dodge Durango

1 Answer

2005 Dodge Magnum low beams do not work


Obviously you have a connector which has come partially apart somewhere between the Headlights and the Headlight Switch. Most modern vehicles have several connectors between the Headlight Switch and the Headlights, Start at the Firewall Connector and work forward toward the Headlights making sure all connectors are securely mated. Another remote possibility is that you have fractured the "Low Beam Filaments" in BOTH Headlights. You don't mention how hard you hit the Speed Bump but if it caused the car to "Bottom Out" the front suspension it was a hard enough impact to fracture the filaments. You can use a 12 Volt Test Light at the Sockets for the Headlight Bulbs and see if you are getting 12 Volt power there. If you are in Low Beam position you have fractured the filaments. Check with High Beam too.

Nov 18, 2011 | 2005 Dodge Magnum

1 Answer

Electrical system acting weird


You have a cluster malfunction. Dodge had a recall on this, if i remember correctly it was a defective capcitor.

Jul 22, 2010 | 2001 Dodge Durango

1 Answer

2000 Dodge Durango - Both headlights out at same time


change the amp meter boom your back on the road

Jul 07, 2009 | 2000 Dodge Durango

1 Answer

Low beams


its not a fuse if the high beams are working. ...there are now three possibilities....1 ...both headlamp bulbs burned out....2 ...a bad multifunction switch...or 3 ...a bad central timer module

Dec 23, 2008 | 2001 Dodge Durango

1 Answer

2001 dodge 1500 van, headlights stay on always.


It the multi-function lever (turn signal) . When you pull back the handle ,this turns on the high beams headlights and indicator on the dash.

Nov 14, 2008 | 2000 Dodge Ram Maxi

2 Answers

Headlights Not Working, Brights and Turn Signals Work


This is cuased by the multifuntion switch that is located on the steering column. It is the swith with the headlight dimmers on it.

You just need to remove the steering column bezels and replace the multifunction switch.

Aug 29, 2008 | 1999 Dodge Durango

Not finding what you are looking for?
2000 Dodge Durango Logo

377 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...