Question about 2006 Kia Spectra
Where is the EVAP solenoid located on a 2006 Kia Spectra
SOURCE: Check Engine light
that code definition is "Evap high purge flow fault". It means you may have a problem with the evaporative system. this system routes fuel fumes back to the fuel tank. If you want to try and clear this code, find the radio code for your car and then disconnect the battery for 30 seconds. Reconnect the battery and the check engine light should be out. You will then need the radio code to reset your car stereo. the check engine light may stay off if the condition was a transient one. If not, the light will come back on after you drive the car two drive cycles. That is: two starts, warm ups and shut downs. If the light returns, have a mechanic check it out.
Posted on Jan 22, 2009
if you look underneath the vehicle on drivers side in the area beneath drivers you with see a plastic rectangular sort of shaped box this is evap canister and vent valve is there in this area.
Posted on Jun 20, 2009
Before you turn out the light you should have a code read carried out just to make sure nothing sinister is going on with the management system.
If the car is running ok then the code will probably either pertian to the O2 sensor, the EVAP system, or a drop in catalytic efficiency, but this isn't set in stone, just the most popular scenarios.
Very best regards
Posted on Jun 13, 2008
the purge valve i believe is located near your gas tank unless theyve moved it i should look like a little canister cyclinder shaped. both codes could be set off by the same problem. try replacing the valve.
Posted on May 05, 2009
Tips for a great answer:
Sep 29, 2016 | Cars & Trucks
Jan 07, 2016 | 2004 Chevrolet Chevrolet Impala
Jul 06, 2015 | 2002 Cadillac Seville SLS
Nov 17, 2014 | 2006 Kia Spectra SX
Dec 06, 2012 | 1999 Chevrolet Malibu
Mar 24, 2012 | 2005 Chevrolet Silverado
May 10, 2011 | Kia Spectra Cars & Trucks
Dec 29, 2010 | 2004 Kia Spectra
Oct 13, 2010 | 2006 Kia Spectra
1,135 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: