Question about 2003 Toyota Corolla

2 Answers

Digital clock visible image no longer shows, just blank!

I suspect a fuse operation controls the digital clock image which has gone blank. Can you provide me the location & number of the fuse to check this operation difficulty? Thank you - Bruce

Posted by on

  • jbap Nov 25, 2008

    I have the same problem with my corolla digital clock. The digital time flicked on and off for a few days; when I tapped the screen it would flicker on. Now it no longer shows the time. I will check the fuse to see what happens

  • mrdeliriou5 Dec 13, 2008

    My clock display is also out. It would turn on and off on its own while driving, I can tap it and it doesn't change its status. I have checked all the fuses, and all are fine. Any other suggestions, as leds don't burn out, and it still turns on and off intermittently.

    Thank you.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 49 Answers

The clock is most likely on the fritz. The good news is that you can have it refurbished cheaply at www.subaru-clock.com. If you email "Dr.Clock" at the above website (as he calls himself), he will even provide some simple tips on how to remove your Corolla clock in just a few easy steps.

Posted on Oct 24, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 28 Answers

Look on the fuse panel on fuse panel cover inside ther is a list and diagram of fuses. Check corresponding fuse if it is not blown then you need to replace a bulb.

Posted on Nov 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuse number for speed control


For your mountaineer, speed control is no longer operated with a mechanical servo and cable to the throttle, rather, the processor gathers sensor data and controls the throttle body electronically, so it's a bit different, but there are some fuses you can check yourself.



In the instrument panel fuse block, check fuse 15 for the instrument cluster cruise microprocessor.

...and under the hood in the battery junction box, check fuses 25 and 45

Read more: http://www.justanswer.com/mercury/6cskv-mercury-mountaineer-cruise-gone-04-mercury.html#ixzz3SlI6sXqI

Feb 25, 2015 | 2003 Mercury Mountaineer

1 Answer

What fuse is for the clock in my 95 ford taurus


Clock Memory Fuse 8 and Digital Clock Fuse 6 .
--------
A/C Compressor Clutch Fuse 17
A/C Heater Control Switch Fuse 17
A/C-Heater Mode Switch Fuse 9
Air Bag Diagnostic Monitor Fuse 7
Air Bags Fuse 5
Amplifier Fuse 11
Autolamp Dual Coil Relay Fuse 4
Backup Lamps Fuse 5
Blower Motor Speed Controller Fuse 17
Clock Memory Fuse 8
Courtesy Lamps Fuses 6 & 8
Daytime Running Lamps Fuses 5 & 10
Digital Clock Fuse 6
Digital Instrument Cluster Fuses 5 & 16
EATC Blend Door Actuator [1] Fuse 17
EATC Blower Motor [1] Fuse 9
EATC Control Module [1] Fuses 5 & 16
Exterior Lamps Fuses 4 & 15
Flash-to-Pass Switch Fuse 10
Hazard Lamps Fuse 1
Heated Oxygen Sensor Fuse 5
Illuminated Entry Fuse 5
Illuminated Entry Module Fuse 8
Instrument Illumination Fuse 13
Keyless Entry Fuses 5 & 8
LCD Dimming Relay Fuse 6
Lamps On Warning Fuse 4
Lamp Out Warning Fuses 6 & 15
Liftgate Window Defrost Fuse 6
Liftgate Window Washer Fuse 6
Liftgate Window Wiper Fuse 6
Light Sensor/Amplifier Fuse 18
Low Oil Level Relay Fuse 18
Main Light Switch Fuse 6
Manual Lever Position Sensor Fuses 5 & 10
Mobile Telephone Transceiver Fuse 11
Police Accessory Relay Fuse 6
Power Antenna Fuse 11
Power Mirrors Fuse 8
Power Windows Fuse 6
Radio Fuse 11
Radio Memory Fuse 8
Rear Window Defrost Fuse 5
Redundant Radio Control Fuse 11
Shift Lock Actuator Fuse 5
Speed Control Amplifier Fuse 6
Speed Control Deactivator Switch Fuse 1
Stop Lamps Fuse 1
Transmission Control Switch Fuse 18
Turn Lamps Fuse 1
Turn Signals Fuse 5
Variable Assist Power Steering Module Fuse 5
Warning Chime Fuse 6
Warning Chime Module Fuse 18
Warning Indicators Fuse 18
Windshield Wiper Control Module Fuse 2
Windshield Wiper Motor Fuse 2.

-------
this will help.thanks.

Feb 20, 2010 | 1995 Ford Taurus

2 Answers

2002 Volks. Jetta - digital display for odometer, clock, gears


Mine went blank after condensation inside windshield dripped behind the dash (sunroof drain problem). After a few months, in really dry winter weather, digital display time, gears, odometer came back. I assume water inside dash just needed time to evaporate. Sure beats $1000 to replace unit inside dash!

Aug 26, 2009 | 2002 Volkswagen Jetta TDI

2 Answers

My 2003 volvo s80's clock has gone out, but the other message "box" is still visible.


remove your combine instrument,check bulb for clock,,replace if the bulb burn or failure.

Jul 12, 2009 | 2003 Volvo S80

1 Answer

Mazda 3 (2006) Information Display panel is blank


I took it to the dealer. They fixed under waranty. The new issue is the flash and beep confirmation upon double locking the doors no longer works.

Apr 15, 2009 | 2004 Mazda 3

1 Answer

No clock inside, how can I install one?


Find a blank spot on the dash and make sure there is room behind it to allow a clock to fit there. Find a clock you like in a junkyard and cut a hole where you want to mount it. Careful cutting near any wiring.. Before installing, determine where power attaches to it and make a simple two wire harness ((3) if you need an extra to power a light. Use an in-line low amp fuse in both hot leads. Attach wire that runs the clock to any open acc port in the fuse block that is hot at all times. Attach light power to acc port that is only on with key. attach ground to metal frame of dash. Don't tap power from any fused circut...it may change operation of any control module in that circut. Make sure the new wires do not rest on any sharp metal under dash.
Good luck

Mar 06, 2009 | 2000 Jeep Grand Cherokee

1 Answer

Radio and clock


change new clock

May 26, 2008 | 2006 Suzuki Swift

Not finding what you are looking for?
2003 Toyota Corolla Logo

704 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...