Question about 2006 Volkswagen Jetta

1 Answer

Clutch slip problem when gears are changed after 4000 rpm

Vehicle 2006 VW Jetta 2.0;
Clutch plate and pressure plate changed at 43000 kilometres; flywheel skimmed as well;
current mileage is 65 000kms and vehicle clutch still slips

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 261 Answers

You have 20k miles after the clutch has been changed, now are you used to drving clutch, secondly is it hydraulic or cable controled clutc?

if you are used to drving clutch sys probable cause is defective pressure plate or the throwout bearing is not fully releasing in other words the clutch is partialy applied all the time because of the re;ease bearing not fully releasing!!

Posted on Nov 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mazda 2 has 105k miles. Why do I notice less acceleration and more RPM change?


If you accelerate especially when using high gears such as the 4th and 5th gear and the RPM is able to increase freely with the speed struggling to catch up with the RPM, it means your clutch is worn out and is slipping.

You need to get the clutch replaced in order for this issue to be rectified, especially if your clutch have not been changed before.

Nov 24, 2015 | Mazda Cars & Trucks

1 Answer

Transmisson slips changeing gears and revees up real high


Hi, You have a bad CLUTCH plate that needs to be replaced.
Or a bad tork converter. In any case you have to take the tranny out to inspect.

Jan 13, 2014 | 2000 Mazda Millenia

1 Answer

I have a 2000 vw beetle turbo manual transmission when i try to drive it it is not going into each gear could it be the clutch?


Does it grind the gears in the transmission. If yes, it could be the clutch/pressure plate. It could be the clutch hydraulic slave cylinder not working. Check all these thing out before purchasing a new clutch/pressure plate. When VW is running does if like the vehicle has no get up an on like maybe the clutch is slipping. GB...stewbison

Aug 22, 2011 | 2000 Volkswagen Beetle

1 Answer

1997 VW Jetta Gearbox Slips! I downshifted from 5th to 4th as I was merging onto a freeway connection ramp; but had to speed up immediately to ensure I was able to merge to the freeway lanes; so when I...


Symptoms are those of a clutch up for replacement. There's a thin layer of clutch plate left before the rivets holding the plates hit the metal clutch surface. The effects you describe are quite normal.

There are 2 flavors of clutch replacement - new and refurbished. Both usually can be obtained through a WV dealer. The difference is usually warranty and price.

Jul 03, 2011 | Volkswagen Jetta Cars & Trucks

3 Answers

How do i know my clutch is gone out


You can do a third gear test.. Try and start it in third and ease out on the clutch. If the car stalls your clutch is ok. if it slips most of the way, you know its not in good shape.

Other signs of a shot clutch is while its in gear you can floor it and the rpms will shoot up and the mph will not rise as fast, this is the clutch slipping on your flywheel.

Mar 03, 2011 | 1992 Toyota Celica

1 Answer

My 2000 VW Jetta TDI suddenly lost power on the interstate. It seemed that it took twice the RPMs to keep the same speed. Is this the turbo kicking off? At lower speeds it feels as if it does not change...


Most likely its your transmission slipping You will need to have it checked by a mechanic if the rpm is double then it has nothing to do with the turbo, if it's a automatic it means the clutches are slipping or if it's a standard it means the clutch is slipping from being worn out or the pressure plate is wore out.

Jun 05, 2010 | 2000 Volkswagen Jetta TDI

1 Answer

Jetta 1991 carb.car does not want to idle after 4000 rpm.changed carb , base plate , gasket on intake manifold.no luck


TOOK THE CAR TO BOSCH DEALER AND RUN A FEW TESTS ONLY TO FIND THAT THE AFTER MARKET CARB AND BASE PLATE DID NOT WORK AS GOOD AS GENUINE VW PARTS.AFTER MARKET CARB HAS 2 VACUMS AS GENUINE VW HAS 1 AND THE AFTER MARKET BASE PLATE IS MORE FLEXABLE THAN GENUINE.I INSTALLED GENUINE VW PARTS NOW AND IT SEEMS MY PROBLEM IS SOLVED FOR NOW.

Feb 16, 2010 | Volkswagen Jetta Cars & Trucks

1 Answer

2001 hyundai clutch is slipping- how do you get it to stop? Is there an adjustment- something that needs to be cleaned or replaced? The pedal is fine- everything seems to be moving/adjusted ok there- the...


Hi

If your clutch is slipping the clutch plate is worn out and will have to be changed. This involves engine and gearbox has to be taken out - then the gearbox has to be sperated from the engine to remove the clutch assembly and replace the clutch plate with a new one.

There is no adjustment on this clutch as it is hydraulic and therefore is self adjusting.

Hope this helps. Please remember to rate my answer. Thanks.

Jul 17, 2009 | 2001 Hyundai Tiburon

2 Answers

Clutch slipping when it get hot


Check the adjustment of the clutch push rod. It is the rod that connects the clutch pedal to the clutch master cylinder.

Dec 22, 2008 | 1992 Isuzu Amigo

Not finding what you are looking for?
2006 Volkswagen Jetta Logo

Related Topics:

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...