Question about 1998 Chevrolet C1500

3 Answers

Truck idles and runs fine when slowly accelerating. when power is needed for merging motor (350) has stalling problem (doesn't kill though). New fuel pump and filter installed.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If it is an older model say from late 90's on down. It could be your automatic advance on your distributor is bad. This is caused by vacume leak to distributor.

Posted on Nov 15, 2008

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

If it's a carb model it's the accelerator pump, check by looking down throat off carb and observe spray out of nozzle while pulling on throttle

Posted on Nov 13, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

If it's a fuel injected the it's your fuel reglater that's going bad...but if it's a carb. chevy then the flote's need to be reajusted to the right setting...hope this helps and good luck..

Posted on Nov 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

STalling out with acceleration


Possible MAF sensor or loss of fuel pressure due to a failing fuel pump is best guess. I would really need to drive it to be sure and run some tests

Feb 14, 2016 | 2008 Mercury Mariner

2 Answers

89 ford probe hesitates when leaving a red light, then runs fine otherwise, fuel filter?


Engine Runs Rough, Stalls, Hesitates on Acceleration, Hard ...

repairpal.com > Problems > Ford > Probe
Ford Probe Engine Runs Rough, Stalls, Hesitates on Acceleration, Hard Starting, Poor Performance. This is a verified problem based on 9 reports. Learn more ...

Starting Problems - 1997 Ford Probe - RepairPal

repairpal.com > Questions > Ford > Probe > 1997 Ford Probe
Dec 5, 2010 - Starting Problems on 1997 Ford Probe ... If the engine runs rough,stalls, hesitates on acceleration, is hard to start, or has generally poor ...

A new misfire/hesitation on accel. Problem.. - ProbeTalk.com Forums

forums.probetalk.com > Tech Section > 2nd Gen (93-97) V6 2.5L

Feb 05, 2016 | Ford Cars & Trucks

1 Answer

Engine cut out


Sounds like you may have fuel filter problem. you may want to check the pump and filters located in or near the fuel tank.
Go directly to the source ( Fuel Tank, Pump, Filters, Fuel Pressure Regulator and Injectors )
You may have water or grit in the fuel
Hope this helps

Mar 22, 2014 | GMC Sonoma Cars & Trucks

1 Answer

Stalls out when the gas pedal is hit


Pull a spark plug. Is it black? Stalling on acceleration. Possible cause: vacuum leak; can be detected by spraying water on suspected area. Will produce sound as if drinking from a near empty cup with a straw.
Possibly throttle position sensor. When they go bad, they have a tendency to tell the ecm to release more fuel than needed, flooding the engine, and killing your gas mileage.

Nov 11, 2013 | 1991 Chevrolet S-10

1 Answer

Ford E-350 2001 V-10 gas. 70k mi. - problem developed suddenly, no gradual lead up. - runs rough, stalls both driving or sitting idle, seems to surge a little i.e. surges above idle rpm while sitting. was...


Check your fuel vapor recovery system, your van has unusual set up, and the effect is RAW fuel gets purged, rather than vapor.
The dead giveaway test is does the issue happen on light acceleration? Does it stop if you let off the throttle? Can you accelerate harder and "get past" the issue?

Dec 12, 2010 | 2002 Ford E350

1 Answer

2003 PSD 6.0L ran fine until I started off the


fuel pump when you started up the incline the tank was not full the gas went to the back of the tank made the fuel pump run dry now it no longer has the right pressure to support the engine or the filter cloged in the tank

May 07, 2010 | 2005 Ford F 350 Super Duty

1 Answer

Wont rev past idle


you need to have the fuel pressure checked

Feb 01, 2009 | Hyundai Motor 2000 Tiburon

Not finding what you are looking for?
1998 Chevrolet C1500 Logo

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...