I have a cracked driver's side mirror. I ordered a replacement, and I have absolutely no idea how to get the old one off and the new one on. I also found that Haynes and Chilton do not publish books on the 2003 Saturn Vue. By reading some of the posts here, I did find out I need to change the crankshaft position sensor. I also think I found out I bought a piece of garbage car. I've been a Chevy/GM man my whole life, but I bought a new Nissan Altima this year - a dream. This Saturn started me off the Chevy lots.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
a few auto stores carry the replacement [ mirror only ] but you will have to shop around .go on line such as ebay ,or look up ford -lincoln parts online-other is a junkyard ,and last but not least is a dealer
Remove the side mirror from inside the door, behind actuall mirror. Remove plastic triangle trim and then 3 support screws. If your just replacing the mirror itself (if cracked) just see a glass shop, they can cut a new mirror and glue it onfor you. -very inexpensive....
Most heated mirrors on vehicles are made together. In other words, just replacing the mirror may or may not fix your problem. It would be more economical to purchase the entire assembly and replace it.
On the inside trim, you can remove screws that are by the door handle,
arm rest, under door and side of door and then gently pull back on the
panel as there will also be retaining clips attached and you don't want
to break them. You'll need to lift the door panel upwards in order to
get it off the window ledge. Then you'll need to manipulate the panel
and disconnect the door handle linkage from the door handle and
disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
to replace it you have to open up the door take off the little plactic piece in the corner of the door,, then there is going to be 3 screws that you have to remove in order to remove the old one, just do the steps in reverse to replace the new mirror, i just had the same issue, but on the driver side.. good luck
well the best way is to take the inside mirro cap off there are 3 bolts that need to be taken out 10mm if its not accessible from there you need to loosenthe trim panel and take it off look around for hidden pop ups take the pop ups out and take the screws out then from there pull the bottom of the door trim out and slide arms around the edges and pull out there then pull up and outThanks for using fix ya. Please rate my response thank you very much
On my '97, there was a triangular shaped piece of plastic on the inside trim that had to be removed. I think all three mounting screws were under that. It's been a few years, but I think that was how it was done. I remember it was pretty easy though.