Question about 2006 Chrysler Town & Country
The sliding door wiring on my 2001 Chrysler Town & Country has finally quit working all together (with the help of the Chrysler Dealership). They want $500 to replace the door harness. I have seen several posting of people fixing the problem themselves, but I am unable to find the part anywhere. Can someone please direct me to a company that I can purchase a new sliding door harness? Thanks
You need to remove the old harness and open it up then repair the broken wires this will save the old harness and what the other people are talking about
Posted on Oct 05, 2009
The $500 for parts and labor try to see different dealer and ask them for the harness alone no labor take the harness and installed it is not that hard to put in
Posted on Jul 28, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
your door panel can come off and you can access internal door locking mechanism from inside car first inspect to see all rods are hooked into plastic sleeves then make sure lock is disengaged by pulling rod towards rear of van it should then be able to be opened easily if not your locking mechanism is frozen inside of door between a pillar and door it will have to be pushed to open from inside of door panel once you do that door will open if you cant make lock work manually once this is done replace locking mechanism or rods accordingly.
Posted on Feb 04, 2009
Take a look at end of door where latch is & post where the 2 meet when closed. Look for round metal button/contacts, about 1/2" in diameter. If you look close, they should line up to make contact with each other when door is closed. Take some fine steel wool (preferred) or fine sandpaper and scuff them up until you see metal is clean on both surfaces. Now try it, and let me know what happens.
Posted on Mar 09, 2009
i just fixed one. it had a broken wire in the harness that moves with the slider, you have to completly pull the harness apart to find it
Posted on Mar 26, 2009
Not sure if they are same on 2006 but there should be a couple of small rounded metal contacts, or similar, on door that meet with door post to complete the connection. When you find them, clean them off with a little fine steel wool or SOS pad, minus the soap, and see if that doesn't cure it.
Posted on May 18, 2009
Tips for a great answer:
Mar 20, 2013 | 2009 Chrysler Town and Country
on Apr 05, 2012 | 2001 Chrysler Town & Country
Mar 30, 2012 | 2001 Chrysler Town & Country
Aug 27, 2010 | 2005 Chrysler Town & Country
Nov 17, 2009 | 2005 Chrysler Town & Country
May 01, 2009 | 2005 Chrysler Town & Country
Mar 18, 2009 | 2006 Chrysler Town & Country
Oct 20, 2008 | 2001 Chrysler Town & Country
Sep 23, 2008 | 2006 Chrysler Town & Country
Jun 23, 2008 | 1994 Chrysler Town & Country
1,337 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: