Question about 2002 Honda Accord

1 Answer

Blinking D4 drive gear in the dashboard

The drive gear indicator D4 in the dashboard is continously blinking

Posted by on

  • deleadetoye Nov 13, 2008

    The D drive light blinks after driving for 5minutes. This started after servicing the gearbox. The clock and stereo light doesnt come up though the clock and other things are working but the light doesnt show.My radio and CD player demand code after l changed my baterry.Pls help me,am missing these accesories.The serial number of the stereo is u1112 L2149.

    Honda Accord 2002,chasis no IHGCM66593A0009674, Engine no.J30A41012182. Somebody out there should help me.Akindele Adetoye

  • Anonymous Mar 19, 2014

    Periodic problem. All lights come on (red) on dashboard for gears. When car is turned off and turned on, problem disappears.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 44 Answers

You need to check the codes for the trans first.
have to contact the honda dealer for a radio code.
needs a clock light bulb.

Posted on Dec 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

This my sec trans and the d4 light cont to blink, replace tcm (brand new) now the car stays in sec. gear & d4 light is on but not blinking. so I place old tcm back in and the car drove d4 still remain...


you have problem with your transmission computer located under your dashboard behind your radio comparment i had the same problem replaced that for a used one or rebilt one and solve
just make sure they sincronized again with transmission

May 04, 2011 | 1992 Honda Accord

1 Answer

I have a 2004 honda accord and it drives funny my d4 light in my dash board is blinking when i drive


A blinking D4 light on a honda is an indicator that the computer has determined there is a fault within the transmission. You would need a scanner to communicate with the pcm and read the fault codes.

Aug 24, 2010 | Honda Accord Cars & Trucks

1 Answer

D4 blinking 1995 honda accord


This is involved. When the D4 light blinks, it is indicating a problem with the input or output systems for the A/T. If you find your Service Check Connector (it should be near or at the top of the kick panel on the passenger's side; it's usually blue and has two holes in it; it is at the end of a wire so don't look for a fixed unit; it is often simply tucked in behind the top of the kick panel. You should pull the kick panel out to find it) you can insert a paper clip so that it connects the two holes. Then, if you turn your ignition to ON II (do not start the car) the D4 light will blink out a code, using both long and short blinks. The blinks have to be carefully counted. Problem codes 1 through 9 care indicated by short blinks. Problem codes 10 through 15 are indicated by a series of long and short blinks (you have to add them together to get the code).

I tell you all this to indicate that the procedure is fairly involved, and since you probably don't have a list of what the codes mean, I would have to say that it would be best to find, if you can, a Honda dealer to read the codes and check your transmission. Most of these problems are connector or sensor related and are usually indicated by the transmission not shifting from one gear to another, or by the transmission jerking hard when it shifts. If your having no problems and you are in a position to not have access to a Honda service department, you can find the backup radio fuse in your engine compartment fuse box and take it out(not with the car running) for 10 seconds or so, then put it back. It will clear the computer. If the D4 starts blinking again, it would indicate that the warning was not just a glitch.
I really hope that this is helpful; I'm sorry if it is only disheartening.

Oct 29, 2009 | Honda Cars & Trucks

1 Answer

Blinking D4 drive gear in the dashboard


when it is blinking it should have some codes stored have someone with a scanner get the fault codes this indicates a problem within the transmission may be a speed sensor does your speedometer work ?

May 27, 2009 | 2002 Honda Accord

1 Answer

Light around "D4" transmission indicator is blinking


this indicate a transm. failure, begin to check fluid transm. level.

May 01, 2009 | 1995 Honda Accord

1 Answer

A/T wont shift upon starting engine....needs engine rev-ups.


it sounds like the tranny fluid is low or it needs to be changed i really think its low!

Apr 20, 2009 | 1994 Honda Accord

2 Answers

1992 Acura Vigor dashboard gear indicator blinks


TRY WHAT THAT OTHER PERSON SAID. IF THAT DOESNT WORK POP UR HOOD OPEN AND SLAM IT DOWN. ONE OF UR SENSORS ARE DIRTY OR LOOSE SAME THING HAPPENS TO MINE.

Jun 28, 2008 | 1992 Acura Vigor

2 Answers

D4 gear lights ( dashboard ) starts blinking even I'm using other gears


The D4 light blinking is the vehicle computer telling you there is a transmission malfunction and transmission codes are stored in the computer's memory.The codes have to be pulled out manually unless it has an OBD2 connector.A transmission shop or Honda dealer can pull the codes.

Jun 22, 2008 | 1995 Honda Odyssey

Not finding what you are looking for?
2002 Honda Accord Logo

739 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...