Question about 1995 Chevrolet C/K 2500

1 Answer

Transmission will only shift first two gears

The truck is a 1995 Chev CK2500 4X4 it will shift into second but will not shift into third are forth

Posted by on

  • Anonymous Dec 27, 2008

    i have the same problem. in my ´98 tahoe is the third 4l60e tranny. two times the same: clutches gone ...

  • Rod Roy Dec 16, 2016

    replace the 3-4 clutch

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 275 Answers

Is the tranny a 4l60e or 4l80e. it may be major internal tranny problems

Posted on Nov 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 chevy regular cab 4.3l v6 2wd wont go into overdrive


Sounds like it is stuck in second gear. Overdrive only drops rpm by a couple hundred. In third gears you should still be less than 3,000 rpm.

Second gear is a default gear when the transmission is in limp mode. Is the check engine light on? Does it shift if you manual shift through the gears with the gear selector?

Sep 21, 2014 | 1995 Chevrolet C1500

1 Answer

Transmission only has second and third gear


run fault codes and look for TCM failure or OD solenoid servo fault.

Dec 07, 2013 | 1995 GMC Sierra C1500

1 Answer

Blazer has first and second gear but won't shift


You have a shift solenoid sticking its located in the valvebody.Pull the transmission pan off and you will the solenoids in the back of the valvebody they will have wires hooked to them.Replace the bad solenoid and the filter.

Nov 27, 2011 | 1999 Chevrolet Blazer

1 Answer

I have a 1995 chev. tahoe, transmission won't shift into 3 and od, motor just revs


Ok if you have 1st and second gear and it shifts to neutral instaed of 3rd , that means the 3-4 clutches are burned up.This is common problem with the 4L60E transmission and the transmissionwill need to be removed and rebuilt ot repaired.The 3-4 clutches are the weak point in the trans and i usually use a z-pack when rebuilding them.It increases hold capacity and durability.

Feb 27, 2011 | 1995 Chevrolet Tahoe

1 Answer

Transmission does not shift in the third and fourth gear


Well could be a couple of different things wrong.
If it is an automatic transmission could be the pressure solenoids in the transmission. or some thing is broken in the gears.
If it is a standard it could be the synchro gears inbetween that let you shift into the next gear.
Needless to say unless you are a transmission mechanic, take it to the transmission professionals and they will tell u if it can be fixed or depending on the hours for labor, or if u really need your car, you can have a rebuilt transmission installed in about 2 days. Rebuilding yours could take up to a week depending on the experience of the mechanic. I have worked on standard transmissions but I wouldnt even try an automatic.
I had a rebuilt automatic put into my chev pickup in under a weekend for 1300 bucks, but I had a shift kit installed as well while I waited lol.
hope it helps
D

Jan 06, 2011 | 1995 Chevrolet Monte Carlo

1 Answer

What is the switch for in the lower left side of the dash on my 1995 Pontiac Grand Prix, it's labeled, start in second gear


with switch on, the transmission will not shift into 1st gear--it will start in second and then shift to third, etc.. This is OK for normal driving, but not if you start on hills or want to accelerate quickly from a stop.

Aug 23, 2010 | 1995 Pontiac Grand Prix

1 Answer

1995 chevy blazer transmission will not let truck shift out of second when in drive


Normally while driving in overdrive (4th gear) you will feel it start slipping and finally slide into third gear. Then 3rd gear slips out into second, and you will never see 3rd or 4th gear again. I'm guessing this was the problem? If so its time for an overhaul

Dec 22, 2009 | 1995 Chevrolet Blazer

1 Answer

97 venture 4 speed electronic transmission not shifting into 4th


4th clutch hub splines are stripped off. GM didn't harden the splines until 2004 or so so the early model gradually wear to the point where they are so thin they strip off - and then, no 4th gear

May 06, 2009 | 1997 Chevrolet Venture

Not finding what you are looking for?
Cars & Trucks Logo

610 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...