Question about 2002 Jeep Grand Cherokee
I can't get to it to replace the bulp, need very detailed step to replace the burned out bulb. I'm a woman. 2002 Jeep Grand Cherokee.
When you have the hood up, directly over the headlamp are 2 screw (8mm) unscrew the 2, pull them completly out (they are about 8 inches long) and the headlight will come out. NOTE: there is a locking ball on the refelctor side of the headlight. the light will feel as if it is stuck, but just pull firmly and straight. When re installing listen for the click of that ball going back in. replace both screws and you are done!
Posted on Nov 17, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 11, 2015 | 2002 Mercury Grand Marquis
Nov 29, 2013 | 2006 Honda Civic
Sep 30, 2013 | 2004 Toyota Corolla
Oct 01, 2012 | 2000 Volkswagen Beetle
[Information] For a 2002 Toyota Camry, the Daytime
Running Lights (DRL) operate utilizing the High Beams (inner Lamps closer to
the center of the vehicle front) at a reduced power.
[The troubleshooting process:] Review the Owner's Manual and ensure the test
configuration matches the following criteria:
1. According to the 2002 Toyota Camry Owner's Manual (Check your Owners Manual):
"The DRL system will make your headlights come on at a reduced brightness when:
The light switch s in the "DRL" position.
The ignition is on with the engine running.
The headlight switch is off.
The parking brake is released."
2. Set the Test Conditions according to Step 1 above.
3. Check the headlight bulbs to ensure they are not
burned out. If one burns out, there is a fair chance that the other would have burned
out at the same time. Replace as necessary.
In this case, if the high beams operate, the DRLs should also operate.
4. Test the system, ensuring the step 1 conditions are set. (Engine running, Multi-function Switch on Turn Signals in "DRL" position, headlight switch off (repeating what the manual says -- it should be obvious that in the "DRL" position, the headlight switch should be off / do not have the switch positioned to "High Beam"), and the Parking Brake "off").
5. If DRL lights do not work, check the engine compartment Fuse and Relay Box. there is a 5 Amp DRL fuse -- replace it with the spare. Test (step 4).
6. If it does not work, swap around or replace relays -- there are three (3). Any one of them could be bad (stuck or burned out). Test (step 4).
7. Other less likely possible issues could be that the Multi-function Switch is broken or a connection / wire is broken. [Beyond the scope of this process.]
My problem was that the test configuration did not have
the engine running and parking brake off - Step 1. Problem solved with much
thought, repetitive tests on the vehicle and going back to the basics -- what
does the Owner's Manual say and where are the applicable fuses and relays
Dec 30, 2011 | 2002 Toyota Camry
Apr 04, 2011 | Jeep Grand Cherokee Cars & Trucks
Dec 08, 2009 | 2004 Ford Explorer
May 09, 2009 | 1997 Ford Explorer AWD
Nov 25, 2008 | Infiniti QX4 Cars & Trucks
100 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: