Question about 1999 Ford Crown Victoria

1 Answer

Traction control in the 1999 ford crown vic

Engages on turns acceleration or bumps

Posted by on

  • Anonymous Jan 25, 2009

    I dont think you can turn it off. I have tried everything on my brother's Vic 99. However, if you press the overdrive button, the traction control becomes a bit more lenient.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

You may have a bad switch or a lose connection to the traction control module or a bad module...try the connection and if it's not lose then you have a bad module...good luck..

Posted on Nov 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I dont know which fuse controls my fuel pump on my 1999 ford crown vic


On fuse pannel it should say fuel pump. It should be near battery or inside car. Read owners manual for more detail.

Jun 10, 2011 | 1999 Ford Crown Victoria

1 Answer

Crown Vic wont turn over.


I would check the plugs around and on the engine. Also check to see if the inertia switch in the trunk was tripped, that cuts off power to the fuel pump in an accident.

May 11, 2010 | 1984 Ford Crown Victoria

1 Answer

I need to know if there is a speed threshold where the traction control activates? When it is engaged can the rear tires spin on wet pavement due to acceleration from a stop?


normaly it should not it might spin out a litle bit but stop afer the traction control sytem get on...the( t.c.s) is made to reduce the danger of loosing control so when a weel is not turning at the same speed of others it release the traction! i hope this answer your question,Thanks! please reply!...lipak!...

May 06, 2010 | 1998 Ford Crown Victoria

1 Answer

1999 ford crown vic with ignition coils going bad a lot.


have look at ur wires that is caming from the car in to the coil it self

Mar 10, 2010 | 1999 Ford Crown Victoria

1 Answer

2001 Crown vic LX Sport..Blower motor inop car has auto climate control. blower stopped then worked again then stopped again.


The blower motor might be bad,turn it on,high blower,and bump the blower motor body with the palm of your hand,if it starts to run,or tries to run,then replace the blower motor.

Jan 05, 2010 | 2001 Ford Crown Victoria

1 Answer

1999 FORD CROWN VIC. 4.6 - PROBLEM, NOISE


This is caused by the IAC valve. Over time the valve becomes gummy and inoperative. Get it replaced and the problem is solved. IAC stands for idle air control, hence the stalling concern.

Oct 17, 2009 | 1999 Ford Crown Victoria

3 Answers

Does the crown vic police intercepter take as much oil as the regular crown vic? (when changing the oil and filter)


I ~think~ the 1999 is the same as the 2000 (mine is a 2000 P71)

The 2000 CVPI (Crown Vic Police Interceptor) owners manual recommends the following:

Engine Oil - Motorcraft SAE 5W-30 Super Premium Motor Oil 5.0 quarts

Transmission Fluid - Motorcraft Mercon V ATF 13.9 quarts (fluids Mercon & Mercon V are NOT INTERCHANGEABLE, DO NOT MIX)

Fuel Tank - 19.0 gallons

Break Fluid - DOT 3


Rear Axle Lubricant - Motorcraft 80W-90 Premium Rear Axle Lubricant 3.75 pints (add 4 oz of Additive Friction Modifier C8AZ-19B546-A or equilavent meeting Ford Spec. EST-M2C118-A for complete refill of Traction-Lok Rear Axles)

Engine Data - 4.6L V8 Engine
Cubic Inches - 281
Required Fuel - 87 Octane
Firing Order - 1-3-7-2-6-5-4-8
Spark Plug Gap - 1.3-1.4 mm (0.052-0.056 inch)
Ignition System - Coil On Plug
Compression Ratio - 10.0:1

I hope this helps!

Jun 27, 2009 | 1999 Ford Crown Victoria

1 Answer

2003 Ford Windstar Traction Control engaging while driving


If it happens alot I would replace your traction control mechanism. Otherwise it may have just been one of those fluke car things

Jan 08, 2009 | 1998 Ford Windstar

1 Answer

Engine knock 1999 ford crown vic


Are u using the recommended fuel ? if so try running a couple of cans of fuel injection upper cylinder cleaner through the system with the next few tanks of gas, try LUCAS brand, it is among the best, the next step is to have the engine de-carboned by the dealer, this works very well, you can also remove an octane selection jumper, it retards the timing 2 degrees, that will most times stop the ping.

Sep 10, 2008 | 1999 Ford Crown Victoria

Not finding what you are looking for?
1999 Ford Crown Victoria Logo

Related Topics:

270 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...