Question about 2002 Chevrolet Blazer

1 Answer

Brake light stay on while foot is off of pedal

The brake lights stay on when running and foot is off the pedal..And my passenger side blinker is stuck..and the hazard botton does not move.When the car is off and i press the brakes the lights don't go on except for the 3rd light on top of the window.

Posted by on

  • jjm8022 Nov 13, 2008

    I've been hearing about the problems that the multifunction switches are on these..so would that go about with the wireing?Or is that totally different?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 275 Answers

Check the bulbs and the wiring there may be a short

Posted on Nov 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 windstar passenger side directional blinks fast but the front bulb and socket work when I swap them with the drivers side.


Could be a bad earth connection. What happens then is. The directional blinker uses the positive of the other one as an earth. When it happens again. Put your foot lightly on the brake pedal. And check if the blinking speed changes.

Feb 05, 2017 | Cars & Trucks

1 Answer

88 suzuki Samari I replaced RR and LR tail lights housing. (New)blinkers work break lights work also.when I take foot off break pedal the break lights stay on and parking light and break light.Help


Their is switch the brake switch its on the brake pedal up high .
It sounds like its working because the lights work .
However it dose have an adjustment on most of them ware you can move the switch in or out so it olny makes contact when you touch the pedal with your foot .
This sounds like you need to back the contact out a little its a nut 1/2 turn should do it .
Its usely vary simple take a look at it even if you need to replace it it is an 88 its inexpensive and not hard to do .

May 07, 2015 | Suzuki Cars & Trucks

1 Answer

Driver side blinker goes double time when headlights are on and all the bulbs in the rear flash at a different time. When the brake pedal is pressed driver side brake light goes out and both reverse l


You have a broken Ground wire From Body to Frame . You Should Have a Heavy Braided Ground wire From Engine Block to Frame on Pass side, Then You will have another one that goes from firewall to engine , like at the back of the Head on passenger side to a screw to firewall.,....One of these is Broken,Loose, Corroded.

Feb 29, 2012 | 1998 Chevrolet K2500

1 Answer

Brake Lights and Hazard still dont work


TEST FRONT RIGHT BLINKER CIRCUIT AND REPLACE THE BULB,,WITH PROPER BULB...A DOUBLE CIRCUIT BULB IN A SINGLE SOCKET WILL DO THAT ALSO A SINGLE SOCKET BULB IN A DOUBLE SOCKET HOLDER....CHECK LEFT SIDE BULB FOR ACURANCY

Aug 29, 2009 | 1993 Chevrolet Astro

1 Answer

Right turn signal stays on will not flash left works.2001 jimmy


its your blinker box.. all major lights run through there

Aug 04, 2009 | 2001 GMC Jimmy

1 Answer

Running,blinkers,brake lights 66 Impala


Hello, the hazzard flasher is causing the problem . Gm had issues with the flasher relay. Please rate my answer thank you.

Apr 06, 2009 | Chevrolet Impala Cars & Trucks

1 Answer

Brake lights making switch at brake pedal get hot and melt at connections.


you need to check the bulbs.
This problem come whit the incorrect bulb.
Or damage socket. be sure to put a 1 contac bulb on a signal.
And 2 contact on brake light.
Check the white wire , is the ground.

Jun 20, 2008 | 1991 Toyota Corolla

Not finding what you are looking for?
2002 Chevrolet Blazer Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

69244 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...