- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
disconnect the battery lead from the starter plus other wires,undo the bolts on the starter flange & the starter should pull straight out providing there is nothing else in the way if there is anything it will have to be removed first.......hope this helps......cheers
First thing unhook positive battery cable, unhook main cable on starter selanoid and small wire on selanoid (there may be 2 small wires) There may be a bracket on front of starter that has to be removed, and then the 2 main bolts that hold it to engine block and it should come out.
if you drop the trans. dust cover on the bottom of the bell housing you should dee your fly wheel. Place your starter in the position and line up the shims (if needed) . adjust the starter in enough to where it clears the torque converter and shim outward if needed
Clicking Would Be The Starter Not Working Properly It Should Spin And Then Engage. It Works Up It Speed And Then Comes Forward If Its Just Clicking It Has Hung Up On Something. Id Suggest Trying To Unjam The Starter By Either Removing It Or Tapping It With A Hammer.
its not to hard to change disconnect battery .remove nut on front of starter to support bracket . remove 2 bolts going through starter into block. lower starter . disconnect wires on solonoid . remeber where they go. tools you will need 10mm 13mm 15mm sockets