Question about 2002 Toyota Camry

1 Answer

On an 02 2.4l camry how do u change the serpentine belt

I know where the tentioner is but when i went to take tention off only the middle of the tentioner turned
any help would be great thanks nick

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,498 Answers

Hi Nick,

  • Get a 14mm or 9/16" socket and a long handled ratchet or breaker bar.
  • Get the belt around all the pulleys except the A/C compressor or Alternator.
  • The tensioner pulley is on a spring loaded arm. Get your socket on the center nut of this pulley.
  • Slowly pull the ratchet toward the center of the engine. The pulley will pivot on the arm allowing you to get the belt on the final pulley.
  • Slowly release the tension.
  • You're done
Mike

Posted on Dec 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to put on serpentine belt


loosen belt tentioner - remove old belt- mount new belt- tighten belt tentioner.

you may also want to check if there is any slack in the tentioner pulley as these often wear out too.

Nov 14, 2016 | Cars & Trucks

1 Answer

What tool you need for the serpentine belt for Toyota Camry 2006


most only require a 3/8 ratchet or 1/2 to remove tention your not really removing anything just moving spring tention ,make sure you note exact way belt is on motor before doing .

Aug 20, 2014 | Cars & Trucks

1 Answer

Serpentine belt slips off


replace belt tentioner its probaly bent theres also a kit to prevent this fro hapening but i recomend reguler tentioner first befor geting desperit lol replaced enough tentioners for the same issue

Feb 01, 2014 | 1999 Chrysler Town & Country

1 Answer

How do change a serpentine belt in my 1994 Grand Jeep Cherokee?


first if old belt is still on jeep draw a diagram of how belt is routed first even i get confused motor needs to be cool release tention on belt some have spring loaded tentioners some you have to losen the center bolt on tintioner pully and turn ajusting bolt to losen belt install new belt tention propley

Jan 21, 2013 | 1994 Jeep Grand Cherokee

1 Answer

How to change drive belt for 2006 chevy uplander


if you're refering to the serpentine drive belt, most are held tight with the tentioner & you will need a 3/8'' drive breaker bar to pull back on it & while doing so, remove the belt carefully & then gently releasing the tentioner. most have a square 3/8'' hole in the middle of it to insert the tool & is easier to remove from under the vehicle. hope this helps.

Dec 01, 2011 | 2006 Chevrolet Uplander

1 Answer

How to adjust a tensioner on a 2001 chrysler voyager


You mean your belt tentioner, serpentine belt, it is not adjustable if your belt is coming off you have a bad tentioner, bad pulley or your power stering pump is leaken and your belt is soaked, if oilly firts found your leak (most common is a hose from reservoir to pump) then replace belt with a cheap belt (had lost of trouble with Life time or hi dollar belts), in the mean time also inspect your tentioner if ani play side ways replace it, also remove idle pulley and spun it close to your ear, if any noise replace it, you may get away with a single item changed, but for trouble free time, replace all items: belt tentioner ($38) idle pulley($25) serpentine belt ($25)

Oct 17, 2010 | 2001 Chrysler Voyager

1 Answer

Where is belt tensioner and how do you turn it to loosen belt to change


The belt tentioner pully is the idler pully in the serpentine belt system...
You need a long wrnch (11/16??) to fit the pullys center bolt...
Turn the bolt to the right ( righty tighty) and the tentioner will losten its tention on the belt enough to remove the belt...
Imediately replace the belt ... so its routing is not forgotten by time or distraction...
If there is still a sticker on the upper radiator support reflecting the serpintine belt routing.. then you are in a better spot to be doing this ... with distractions...

Oct 06, 2010 | 1995 Chevrolet K2500

1 Answer

Where do i locate the tentioner for the serpentine belt


it should be in the middle of the tentioner just make sure u mark everything before u take anything of and i mean EVERYTHING!

Dec 27, 2009 | Hyundai Motor 2004 Sonata

1 Answer

2000 isuzu rodeo removal and installation of serpentine belt


All u need to do is put a wrench on the tention pully and turn it clockwise... this will relive the tention take off the old belt ....put on new one. repeat relive pressure again ...slip it on pully... and relese tention..... done! :)

May 16, 2009 | 2000 Isuzu Rodeo

1 Answer

How to route serpentine belt for 1995 dodge caravan 3.3 no ac


Click on link below and scroll down that page until you see the 3.3L. click on picture to enlarge it.

http://www.autozone.com/addVehicleId,1956001/initialAction,repairGuide/shopping/repairGuide.htm?pageId=0900c1528006a6c8

Dec 18, 2008 | 1995 Dodge Caravan

Not finding what you are looking for?
2002 Toyota Camry Logo

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...