Question about 1989 Cadillac Sedan DeVille
Wiper blades stoped mid wipe. I think its a fuse but cant locate the box. I checked under dash and engine compartment.
SOURCE: fuse box location
I have a '99 Deville. Had the same problem. In the glove box, there are two toggles for Traction Control and Valet. Toggle the Valet one and try the remote on your key or the buttons in your dash.
For mine, someone had engaged the Valet to "ON" and locked out the remote trunk and fuel door.
Posted on Oct 31, 2008
Try taking the cover off the wiper motor under the hood. I found on my 98 suburban that the grease from the gear inside the gear cover had gotten between the contacts in the motor that allows it to return once it reaches limit in one direction. The wipers started back to working correctly immediately. My wife stated that she has experienced the same situation lately so it seems that more of the grease has gotten between the contacts.
Posted on May 03, 2009
On mine I lifted up the arm,at the base where its connected to the car there is a little metal tap that sticks out. Pick up on the tab,at the same time release the arm. It should stay up. Then kind of wiggle the base near the tab while pulling up on the arm.It should come right off.Its on a spline like stub.Try to put it back on the same spline teeth it came off of.This keeps the arm in the proper place. Once off its easier to see how the blades come off. Try calling a large auto parts store to see if they have your proper blades. Most large auto parts stores will install the blades for you for free if you buy blades from them.Dont buy the cheapest ones, they dont last.
I hope this helps you.
Posted on Sep 09, 2009
Tips for a great answer:
Apr 11, 2015 | Dodge Cars & Trucks
Jun 26, 2014 | 2007 Toyota Auris 2.0
Mar 12, 2011 | 1993 Ford Escort 4 Door
Mar 07, 2011 | 1997 Ford F150 Regular Cab
Feb 03, 2011 | 2005 Pontiac Aztek
Nov 08, 2010 | Chevrolet Astro Cars & Trucks
Aug 20, 2010 | Ford Taurus Cars & Trucks
Sep 06, 2009 | 2003 Land Rover Range Rover
539 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: