Question about 2001 GMC Jimmy

1 Answer

2001 gmc jimmy keeps kicking into 4 wheel drive

Lot of times it is when you are pressing the brake in and it kicks into 4 wheel drive but the 4 wheel low light is blinking

Posted by on

  • bmymagician Nov 23, 2008

    i have looked but i can not find a short . i cleaned all the electrical connections.

  • Anonymous Mar 15, 2014

    1998 jimmy will not go into 4 wheel drive

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

The 4 wheel low light will usually only blink because the low gear is meant for a very slow speed and usually wont activate with the vehicle in motion i would have to say the sudden switch to 4x4 though would probably be a short in the wiring some place

Posted on Nov 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuse panel that controls cruise control on a 2001 jimmy gmc


It may be in the fuse panel under the hood. If it is ok, check the cruise control kick out switch operated by the brake pedal. If mis adjusted or knocked out of position cruise will not work.

Apr 19, 2015 | 2001 GMC Jimmy

1 Answer

Where is the fuse box on a 1992 GMC Jimmy 4.3 SLE Automatic 4 wheel drive


The fuse block is located to the left of the steering column about 1/2 way down the kick panel, if you look uo, you will see it.

Mar 05, 2015 | 1992 GMC Jimmy

2 Answers

1996 GMC Jimmy manual - need help with 4 wheel drive - stuck in 4 wheel low and can't get out


Try to place the vehicle in park, then reverse, move the vehicle a few feet in reverse, then switch to neutral but NOT DRIVE. Attempt to take it out of low again and then go to drive. This is the method I had to use occassionally when my vehicles would get stuck in low.

Jul 25, 2010 | 1996 GMC Jimmy

1 Answer

2000 GMC Jimmy slow stop on dry pavement ABS kicks in


It Sounds Like Your ABS Channels, Its A Separate Hydraulic Circuit That Feeds Out To One Or More Wheel Cylinders Or Caliper Pistons.Anti-Lock Brake Systems Can Have From One To Four Channels.

Apr 09, 2010 | 2001 GMC Jimmy

1 Answer

Push button 4 wheel drive stuck in 4 wheel hi


My GMC Jimmy '01 would slip from 2-wheel to 4-wheel drive while I was driving. First time it happened my mechanic replaced a small part. This last time, he couldn't find anything wrong so he popped the 2-4 out and disconnected the 4-wheel drive. Now I don't have the problem.

Feb 22, 2010 | 2001 GMC Jimmy

1 Answer

Is there a fuel cut off switch on the 2001 gmc jimmy???


yes passerng side pull the kick panle off by your right foot if you were sitting in the car and press down

Jan 27, 2010 | 2001 GMC Jimmy

1 Answer

Shifting out of 4 wheel drive electric shift on 1998 gmc jimmy


check the control module located behind pass.side kick panel undo connector plug youll find corrosion on 2pins clean them ,

Feb 23, 2009 | 1998 Chevrolet Blazer

3 Answers

2001 jimmy stuck in 4wd low


Usually when a truck gets stuck in 4 low you need to put it in reverse, start backing up very slowly, put it in neutral (or push in the clutch on manual trans models) and stop the truck with the brakes. this will release the load on the gearing which should allow you to shift out of 4 low.

Feb 15, 2009 | 2000 GMC Jimmy

1 Answer

1983 GMC Jimmy 4 wheel drive won't engage


Must be wear in front end..... .should check transfer.

Jan 09, 2009 | 1983 GMC Jimmy

1 Answer

4 wheel low works but 4 wheel high does not.


sounds like the encoder on the side of the trans on the drivers side

Nov 24, 2008 | 1999 GMC Jimmy

Not finding what you are looking for?
2001 GMC Jimmy Logo

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

63456 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...