Question about 1988 Land Rover Range Rover

2 Answers

88' range rover

Window will not always go up.

Posted by on

  • Karl Molich
    Karl Molich May 11, 2010

    Is the window sticking or does the motor stop working?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

The wire harness in the door jam is under constant stress and causes the wires inside to break especially on the older models.
I have a 88 RRC and the jam light does not always work and when i move the harness in the jam it works.

Posted on Feb 25, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 89 Answers

Check if the window sticks while moving , this will indicate a fault on the window channel or winder mechanism.If the window stops suddenly it is either the switch or the motor , the switch can be taken out and stripped and cleaned easily.

Posted on Dec 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is fuse 88 for Range Rover L233 year 2003


Michael, Check the attached link pdf down load for electrical and fuses,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

http://duud.ee/LR-manualid/Range_Rover_Electronic_Library_L322.pdf

http://www.landroverweb.com/Pdf-files/Manuals/Workshop%20Manual%20L322%20Range%20Rover.pdf

2003 range rover fuse box diagram Google Search

Apr 02, 2016 | Rover Cars & Trucks

1 Answer

How to disengage four wheel drive on 2000 range rover 4.0 SE always running on all four.


If there is no switch or lever, it is suppose to be permanent 4WD. Remove the short driveshaft connecting the front differential to the transmission/gearbox.

Phillip

Nov 20, 2009 | 2000 Land Rover Range Rover

1 Answer

Were is the thermestate on the 99 range rover


Look where the upper radiator hose connects to the engine. Almost always that is the location of the thermostat. If it is not there look where the lower hose connects.

Oct 02, 2009 | 1999 Land Rover Range Rover

1 Answer

Range rover functions


i'm petty sure these functions need to be set by the dealer using a computer. you could always recheck with the owner's manual to be sure.

Sep 10, 2009 | 2007 Land Rover Range Rover Supercharged

1 Answer

1997 range rover 4.0 brake is tough when depressed and car does


If this is too old for abs, then your caliper pistons may be sticking, or pads are worn and you are already at full length of piston travel. YOu can always try to bleed again.

Aug 05, 2009 | 1987 Land Rover Range Rover

1 Answer

88 range rover hard to start


It sounds like you're not getting enough fuel see if any of the fuel lines are leaking. Even the vent tube on the gas tank to filler neck,because that can cause poor fuel pressure.Another thing would be the stepper motor is going bad. And last check the cold start sensor right by the thermostat, the sensor with one wire going to it and is facing straight forward.

Mar 16, 2009 | 1988 Land Rover Range Rover

1 Answer

Transfer case swap out?


What you will need.
Ideally when one obtains the LT230, they will want to also make sure to retain the LT-230 shifter linkage and parking brake drum, cable and the frame mounts as well. Some also chose to obtain the center console pieces from a 1988 Range Rover Classic, which used the LT-230 transfer case, and had provisions for a light which would illuminate when the center differential lock is engaged.

Jul 09, 2008 | 1990 Land Rover Range Rover

Not finding what you are looking for?
Cars & Trucks Logo

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

yadayada
yadayada

Level 3 Expert

63801 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...