Question about Mitsubishi Outlander

Open Question

2003 outlander, back seat release lever is broken

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 462 Answers

SOURCE: Fold down rear seats


Posted on May 25, 2009

  • 16 Answers

SOURCE: Seat adjustment forward and back stuck

the lever has a wire that connects to the other side of the seat track make sure that wire is still connected.

Posted on May 30, 2009

SOURCE: a4 convertible drivers seat.

I have had the exact same problem , the actaual cause of the seat not sliding back is due to the small cable retaing clip which fastens at the underneath of the seat this is a very common problem and is very trickY to get to as you say the rear panel appers to need to come off , it does not, you axs the small clip from removeing the liners at the very bottom of the seat where there is a footwell light , when you axs this area you be able to get to the clip or the actaul cable ,to which ever is broken,,

Posted on Jun 07, 2009

  • 634 Answers

SOURCE: seat lever broken

you have to remove seat from car and turn it over and from there u can access the fasteners and easy from there, take digital pic before taking apart as reference

Posted on Jul 08, 2009

  • 546 Answers

SOURCE: The 2003 VW headlight assembly has a twinkie (e.g.

most headlight assemblys use 2 or 3 screws as well as your ''twinkie''.if a piece of the lock lever is still in there,remove the screws & be prepared to wiggle it some.cursing at it couldn't hurt.

Posted on Sep 22, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2003 dodge durango Driver side Left Side Seat Release Lever mechanism

Fixya does not sell replacement seat release lever mechanisms. This is a junkyard recycle item.

Jul 13, 2016 | 2003 Dodge Durango

1 Answer

2003 mitsubishi climate control stuck

Follow the cable.. It's the white piece that the cable connects to. Some kind of spring doesnt push the white piece forward far enough to select a hot temperature. You can adjust it yourself from the driver's seat at a red light. It feels like flat lever against the dash/transmission tunnel. Push forward for heat, pull back for AC. There's a spring busted or something and the knob can't overcome the required force... Just manipulate it manually. You can see the white lever mechanism clear as day if you open the driver's door, crouch down and look for the big white piece. My guess is that it has a internal tensioner or spring that crapped out.

Feb 13, 2012 | 2003 Mitsubishi Outlander

1 Answer

Jus t purchased a used 2003 yukon xl and trying to find out how to fold the 2nd row seat down cannot find a lever on the one side

The passenger side 2nd row release lever is at the lower right corner. On the driver side, there is no release lever, just a pull ******** the center of the seat, that sometimes falls between the seat.

Aug 26, 2011 | 2003 GMC Yukon XL

1 Answer

Rear seat on 2003 outlander is stuck in the down position how do i get it to the up position?

I have the same problem. Finally found this repair manual on line.
Pages 52A-27 & 28 give a break down of the seat.
The reclining knob is broken #23. It engages the reclining cable #31.
Look closely at the underside of the knob to see if part of it is broken off and this will indicate we share the same problem.
I've always let go off the knob when reclining the seat, but in the future, I'll be slowly releasing it.

Mar 13, 2011 | 2003 Mitsubishi Outlander

2 Answers

2003 mitsubishi rear seat release is broken where is the access point

Im pretty certain you need to remove the rear inside panel where the release is,to get to the cables route to the seat where it connects to release it,so I would suggest that you look carefully for retaining screws or small roundish covers over the screws to help remove the panel to get to the cable and you will need to pull on the trim cover as it has clips going into the inside panel to hold it as well(pull towards you)BUT Look first at the seat where the cable attaches to make sure a small retaimimg clip hasnt come off instead!

Dec 01, 2009 | 2003 Mitsubishi Outlander

1 Answer

2003 Toyota Corolla LE back seat fold down? how?!

Open the back trunk, look near the top of the trunk, and pull the two black levers. They have a seat folding down symbol. That will release the locks to fold the back seat down.

Jul 03, 2009 | 2003 Toyota Corolla

1 Answer

Gas lid will not release 2005 outlander

There is a small spring clip that snaps onto the inside of the door that has broken and/or fallen off.

The new clip is part number MU481269 and costs about $3 from your dealer.

To get the door open to replace it, have someone push on the forward edge of the door while you pull the release lever.

Mar 19, 2009 | 2005 Mitsubishi Outlander

1 Answer

The passanger seat wont go all of the way back any more.

Four bolts to take seat out . release spring on track might have come off or seat track is rusty or bent.
four bolts to take seat track off seat. junkyard parts will have what ya need.

Dec 31, 2008 | 2003 Volkswagen Eurovan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

629 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides