Question about 2004 Dodge Ram 1500
About 2 weeks ago I changed by fuel filter then about a week later I ran it down to no gas. Now what happens is that the truck will just shut down it doesn't give me any warnings it just stops running. Any solutions.
Lift pump, in the fuel tank had to be replace in mine,(dealer item) comes whith kit that by pass the old pump next to the fuel filter, easy to do if you remove the lt splash shield under the drivers fender, you have to install a relay that comes with it also. istruccions in the new lift pump from dealer item
Posted on Feb 08, 2012
There is a filter in the tank that could be plugged. This happened to me.
Posted on Mar 19, 2010
I have an 03 dodge diesel too. My truck did that last year and i had to replace the fuel pumb (lift pump).
Posted on Dec 15, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
there is a technical service bulletin to relocate the fuel pump on this vehicle when the transfer pump needs replaced. there is the possibility the transfer pump is going bad on the 2003 now...its not good to run them low or out of fuel
Posted on Dec 23, 2008
SOURCE: ran out of diesel on
Crack the in line at the injector pump and bemp the motor. This will run the lift pump for 20 seconds or so. DO NOT CRANK THE MOTOR! Cranking the motor with no fuel to the injector pump WILL BURN OUT THE PUMP! Continue to bump the motor until you get fuel at the injector pump. Allow for the LP pump to stop running in between bumps. Once you have fuel at the injector pump, crack the #1,3 and 4 injectors. Crank the motor in 10 second intervals, allowing 10 min. or so between cranks to let the injector pump cool. When the motor starts close the injectors and let it run to finish bleeding out the system. The bleed process is easier with two people. You'll lose less preciouse diesel that way.
Posted on Jan 31, 2009
If you are looking for the fuse box diagrams or any other diagrams for your Ram, check promanuals.net for a factory service manual for around 20 bucks or so. It's an invaluable tool for my Ram 2500.
Posted on Sep 26, 2009
Manual states possible (probable) engine control problem and needs to be checked by dealer. The big auto parts stores will scan for free and hopefully can point you in the right direction of what needs to be addressed. If not, get back to us with that code and we'll be glad to further assist you.
Posted on Feb 07, 2011
Tips for a great answer:
Oct 20, 2015 | 1995 Dodge Ram 3500
Mar 25, 2010 | 2001 Dodge Ram 2500 Truck
Mar 19, 2010 | 2004 Dodge Ram 2500
Jan 22, 2010 | 2004 Dodge Ram 2500
Sep 23, 2009 | 2007 Dodge Ram 3500 Quad Cab Laramie
May 05, 2009 | 1999 Dodge Ram
Dec 23, 2008 | 2004 Dodge Ram 2500
Dec 02, 2008 | 2004 Dodge Ram 1500
Oct 30, 2008 | 2004 Dodge Ram 1500
1,764 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: