Question about 2001 Subaru Legacy
When I replaced the bulb for the shifting light I lost all instruments lights on the dash checked fuse its okay but if I leave fuse in for that circuit my odometer and clock light go out if I take the fuse out they work fine did I do something to the fuse box you would thing the fuse would have blown if it got and overloaded ?
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
find the dipstick ,its their somewhere lurking and yes the transmission fluid goes down the same hole ,,,chock drive wheels handbrake on warm engine(running) with reverse selected to check trans oil level
Posted on Dec 19, 2008
chapmnfarm: your head lights use a "2" fuse system.
one for the left and one for the right.
The fuse box you are looking for is under the hood on the passenger's side. It is a black box roughly 8 inches long and 4-5 inches wide. When you remove the cover, you will see fuses and relays. What you are looking for is the section in the box which has a cluster of 7 fuses. 3 in one row and 4 in the other. On the outer parameter are two relays. The fuses you are interested in are located in the row of 4 fuses, with the two closest to the "L" shaped part of the box. Both of those should be 15 amp fuses.
The fuse below those should be a 20 amp which is the lighting switch and the one below it is a 15 amp which is for the interior lights and the clock.
Check your harness grounds in the engine compartment near the area you have the problem. There are ground wires which come out of the harness on both sides of the core support. The wires are black in color and have "EYES" crimped onto the ends of the wires. Both of them will probably be located about 4-6 inches below the upper tie bar on each side of the radiator. Odds are that the eyes will be large enough to pass a 6mm bolt through.
I hope what I have given you will resolve your problem. Lem me know,,good luck>>>>>>>>>>>>>>>
Posted on Apr 19, 2009
hello,good day,maybe your cluster nearly damage,send to your dealer,they have a testing procedure(simulation all the gauges), to determine if your cluster is defective,ty
Posted on May 14, 2009
Tips for a great answer:
Jan 31, 2016 | Subaru Cars & Trucks
Aug 22, 2014 | 1998 Subaru Legacy
Dec 22, 2009 | 1990 Subaru Legacy
Dec 22, 2009 | 2001 Chrysler Sebring
Jun 30, 2009 | 2001 Ford Ranger Regular Cab
Jun 01, 2009 | 2001 Subaru Legacy
May 24, 2009 | 1993 Subaru Legacy
Feb 15, 2009 | 2001 Nissan Frontier Crew Cab
Jul 20, 2008 | 2001 Chevrolet Impala
113 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: