Time, patience, and expirimenting! There are two slide clips on each and of the light assembly. These lift up and release the entire section. There are rubber caps over the plug in for the bulbs (two). I removed the one for the main headlamp. The bulb was then visible, but it did take me a while to realize the way to remove it was to twist it, not pull it. After the bulb was out, replacing it was simple, reversed the steps.
It was kind of a pain to get the lighting section out as it is not a smooth process and, being a woman, it took a little elbow grease! I also had some difficulty getting the slide clips back in place, but after removing the light panel and sliding it back in, it worked fine.
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Jan 1, 2011 - Uploaded by justhes
Explorer Headlight Problem and Interior Stuff ... Thank's to your movie I fix my car. .... 2001 Ford F150 Headlight Switch Replacement - Duration: 5:05. Jon Olson 10,273 views. 5:05. 2003 Ford F-150 4X4 Repair Part #3 The GEM Module ... EXCLUSIVE: 2016 Ford Explorer Sport with Mark Mills at Athens ...
Sep 16, 2013 - Uploaded by Go-Parts
Replace 2001-2005 Ford Explorer Headlight / Bulb, How to Change Install ... How To Install Replace Headlight Ford Explorer Sport Trac 01-05 ...
May 11, 2010 - Uploaded by 1A Auto Parts
How To Install Replace Headlight Ford Explorer Sport Trac 01-05 1AAuto.com .... I did this on my wifes 2003 Explorer only difference was the screw was a ... Replace 2001-2005 Ford Explorer Headlight / Bulb, How to Change ...
Mar 1, 2014 - Uploaded by Jon Olson
Headlamp Switch was purchased through Auto Parts Warehouse: ... to help me with my 2001 Ford Explorer Sport-HeadlightSwitch, but the .... Ford F150 Explorer 2000 2001 2002 Overhead Console Repair - Duration: 6:38.
Jul 13, 2012 - Uploaded by 1A Auto Parts
http://www.1aauto.com/1A/HeadLights/Honda/Civic/1ALHP00286 1A ... How To Install Replace Headlight and Bulb Honda Civic Sedan 01-03 1AAuto.com ..... JDM style headlight assemblyinstallation..2001-2005 Honda C .
If you didnt know how to replace it, you should not have bought one. Most auto shops will not install parts not purchased from them. Its not a big deal to replace the bulb, just look at the rear of the housing and there wil be a cover and a ring or clip holding the bulb in. Be sure to NOT TOUCH the bulb with your fingers.
a headlight on a Toyota Matrix is a simple process that only requires
the use of a screwdriver and a replacement bulb. The Matrix uses 9006
bulbs for the low beams and 9005 bulbs for the high beams. Headlight
bulbs can be purchased at auto parts stores.
Replacing Low Beam Bulb
Turn off the engine of the Matrix and open the hood
the bulb base in the headlamp assembly counterclockwise to remove the
low beam bulb. Unplug the electrical connector. If the connector is too
tight, wiggle it slightly to help remove it.
Install a new bulb into the connector and place it into the assembly. Rotate it clockwise to lock it into place. Close the hood.
Replacing High Beam Bulb
off the engine of the Matrix and open the hood. If replacing the
left-hand headlight, remove the air cleaner duct by removing the
securing clip with a screwdriver and pulling the duct out of the vehicle.
Turn the bulb base counterclockwise to remove it. Unplug the electrical connector.
a new bulb into the connector and place the bulb into the assembly.
Rotate it clockwise to lock it into place. Reattach the air cleaner
duct if replacing the left-hand headlight. Close the hood