Question about 2002 Chevrolet Blazer

1 Answer

Eng oil light

I need to know how can I reset the the change engine oil light after changing the oil?

Posted by on

  • Atif Elbakri Nov 15, 2008

    I need to know what is CUT KEY on engine. where to find it out.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,450 Answers

CUT KEY on engine off press the accel pedal to floor three times within 5 seconds should see light flash and go out

Posted on Nov 11, 2008

  • TripleTauto
    TripleTauto Nov 17, 2008

    TURN ignition to the on position with the engine off

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Oldsmobile intrigue oil light reset how to m?






Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. If the CHANGE ENG OIL light flashes, the system is resetting.
Turn the ignition off and then start the engine to verify the indicator has been reset.
see attached link for better information


See attached link for better information

May 22, 2014 | 2002 Oldsmobile Intrigue

Tip

Chevrolet service light 1991-01


Camaro

1998-01

To reset the "OIL CHANGE" light, press and hold the "TRIP/OIL RESET" button on the instrument panel for 12 seconds. When the light flashes and then goes out, the system is reset.


Corvette


1997-01

To reset the monitor after an oil change, turn the ignition on. Press the "TRIP" button so that the "OIL LIFE" percentage is displayed. Press "RESET" and hold it for two seconds. The word "RESET" should appear on the monitor, then "OIL LIFE 90%".


Impala,
Monte Carlo


2000-01

Turn the ignition to ON without starting the engine. Fully press and release the accelerator three times within five seconds. If the CHG OIL SOON lights two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHG OIL SOON light comes back on, the system has not been reset, repeat the procedure. Follow this procedure to reset the GM Oil Life System using the DE 100 Series Radio. Turn the ignition to ACC or ON and the radio off. Press and hold the DISP button on the radio for at least five seconds until SETTINGS is displayed. Press the SEEK up or down arrow to scroll through the main menu. Scroll until OIL LIFE appears on the display. Press the PREV or NEXT button to enter the submenu. RESET will be displayed. Press the DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second. Once the message has been reset, scroll until EXIT appears on the display. Press the DISP button to exit programming. A chime will be heard to exit programming. A chime will be heard to verify the exit.


Impala,
Caprice


1994

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Access the reset button on the end of the instrument panel by the fuse block. Press the switch and hold it for at least 5 seconds.



Lumina,
Monte Carlo,
Impala,
Caprice


1996-00,
1996-99,
1995-96,
1995-96

To reset "CHANGE OIL" light, turn the ignition switch to the run position without starting the engine. Fully depress and release the accelerator pedal 3 times within 5 seconds. The light will flash and go out.


Corvette


1990-96

After an oil change, or when "CHANGE OIL" appears on the Trip Monitor, with the ignition on and engine off, press the "ENG MET" button (located on trip monitor) once. Press the "ENG MET" button again within 5 seconds. Within 5 seconds, press and hold the "RANGE" button (1990-1994) or "GAUGES" button (1995). The light will flash. When it stops flashing and goes out, the system is reset.


Chevrolet Suburban,
GMC Yukon XL,
Chevrolet Silverado,
GMC Trucks Sierra


2000-01,
1999-00

Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the CHANGE OIL SOON light flashes 2 times, the system is reset. However, if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset.


Silverado, Sierra Trucks


1991-93

To reset the "CHANGE ENGINE OIL" message, turn the ignition key to the run position. Press and release the accelerator pedal three times within 5 seconds. If the light flashes for 5 seconds, the system is reset. Repeat procedure as needed.















on Dec 07, 2009 | Chevrolet Camaro Cars & Trucks

Tip

Cadillac service light 1989-01


Eldorado

2000-01

Turn the ignition to ON. Press the TRIP button on the driver information center (DIC) switch to view various menu choices and stop on OIL LIFE REMAINING. A message will display the percentage of oil life remaining. Press and hold the RESET button on the DIC switch for at least 2 seconds. A message will display the percentage of oil life remaining as 99 percent. The engine oil life monitor is now reset. Turn the ignition OFF.


DeVille,
Eldorado


1999

To reset the service Oil Life Indicator, display the
"OIL LIFE LEFT" message by pressing the "INFORMATION SKIP" (skip info) button. Press and hold the "RESET NO" (no info reset) button until "100% OIL LIFE" is displayed.


Deville,
Seville


2000-01

Turn the ignition to ON, Press the INFO button on the driver information center (DIC) to display ENGINE OIL LIFE. Press and hold the INFO RESET button on the DIC until the display reads 100% ENGINE OIL LIFE. The engine oil life index is now reset. Turn the ignition OFF.


Deville,
Seville,
Eldorado


1997-98

Display "ENGINE OIL LIFE" by pressing the "INFO" button. Press and hold the "INFO RESET" button until the message shows 100.


All Models
except
Fleetwood


1994-97

Press the "INFORMATION" button until "OIL LIFE LEFT" is displayed. Press the "RESET" button until "100" or "0.0 OIL LIFE LEFT" is displayed.


Fleetwood


1994-96

To reset "CHANGE OIL" light, turn the ignition switch to the run position without starting the engine. Fully depress and release the accelerator pedal 3 times within 5 seconds.


All Models,
Seville,
Eldorado


1993,
1994-95,
1994-95

The automatic transaxle message can be reset through the following procedure. If "CHANGE TRANSAXLE FLUID" appears on the Information Center, press and hold the "OFF" and "REAR DEFROST" buttons until "TRANS FLUID RESET" appears.


DeVille,
Fleetwood


1991-93

When "CHANGE OIL SOON" light is illuminated, press and hold the "RESET" and "RANGE" buttons on the Fuel Data Center for 5 to 60 seconds. When the buttons are released, the light will flash four times if it has been reset. If the light comes back on for more than 5 seconds, repeat the procedure.


Allante


1989-93

When "CHANGE OIL SOON" appears on the Driver Information Center, press the "RANGE" button until "OIL LIFE INDEX" shows on display. Then press and hold "AVG SPEED" and "RESET" (or "RANGE" on late models) buttons until display shows "100".


Seville,
Eldorado


1992-93

Press "INFORMATION" button on the Driver Information Center until "OIL LIFE INDEX" is displayed. Press "STORE/RECALL" until "OIL LIFE INDEX" resets to 100.


Seville,
Eldorado


1989-91

When "CHANGE OIL SOON" or "CHANGE ENGINE OIL SOON" appears on the Driver Information Center, press "ENG-DATA" button until the "OIL LIFE INDEX" appears. Then press the "ENG-DATA" button and the "RANGE" buttons at the same time until 100 displays (about 5 seconds).





















on Dec 07, 2009 | Cadillac Eldorado Cars & Trucks

1 Answer

How to reset service engine light on 2013 Isuzu NRR truck after changing engine oil?


Resetting of 'ENG OIL&FILTER'

When the reset is done, the display of 'ENG OIL& FILTER' will be reset to 10,000 mile (16,000 km).
  • Press and hold the MID select knob at the 'ENG OIL& FILTER' display screen > The reset screen will be displayed > Press and hold the MID select knob

Jul 30, 2013 | Cars & Trucks

1 Answer

How to reset change oil light on a 02 trail blazer lt


To reset the change oil light, do the following:

  1. Turn the ignition key to run with the engine off.
  2. Fully press and release the accelerator pedal slowly three times within five seconds.
  3. If the CHANGE ENG OIL light flashes for five seconds, the system is reset. If the light does not flash, repeat procedure.

Nov 19, 2010 | 2002 Chevrolet TrailBlazer

1 Answer

How to reset change eng oil warning lamp.


SET THE ODOMETER. GET IT OUT OF THE TRIP MODE TO THE ODOMETER BY PRESSING IN ON THE BUTTON CLOSEST TO THE ODOMETER. ONCE THE ACTUAL ODOMETER SHOWS, THEN PRESS AND HOLD THE SAME BUTTON WHILE TURNING THE ENGINE IGNITION ON. CONTINUE TO HOLD THE BUTTON IN FOR APPROX TEN SECONDS. THE CHECK ENGINE OR OIL LIGHT WILL FLASH AND GO OUT FOR UNTIL 5,000 MILES HAVE ACCUMULATED ON THE ODOMETER TO LET YOU KNOW IT'S TIME FOR ANOTHER OIL CHANGE.

Apr 18, 2010 | 2006 Toyota Tacoma

3 Answers

Reset change engine oil light


Information taken from: http://www.idavette.net/tech/oilreset.htm

[quote]
The "Change Oil" indicator is reset by using a sequence of Driver Information Center (DIC) key presses as follows:

1. Turn ignition "ON", but do not start engine. (ALDL pin "G" should NOT be grounded.)
2. Press the "ENG/MET" button and release, then, within 5 seconds, press it again.
3. Within 5 seconds of Step 2, press and hold the "GAUGES" button. While the button is held, the "Change Oil" indicator will flash.
4. Continue holding the "GAUGES" button until the "Change Oil" indicator stops flashing and goes out, indicating successful completion of the reset cycle. This should take about 10 seconds.
If it does not successfully reset, turn ignition "OFF" and repeat the procedure from Step 1.
[/quote]

Nov 16, 2009 | 1991 Chevrolet Corvette

3 Answers

How to reset check engine light and change oil soon light


You should not reset the ck eng light until you have repaired the problem. Its just going to come on again, unhooking the battery MAY reset it. To reset the change oil light, turn the key on and floor the gas pedal 3 times, that should reset the light.

Nov 11, 2009 | 2005 Buick Century

2 Answers

Oil change light stays on after oil change


1. Turn ignition switch on but don't start the engine. Push ENG MET button on the trip monitor ONE time.

2. Press ENG MET one more time within 5 seconds. Within 5 seconds press and hold the RANGE button (90-94) or the GUAGE button on 95 Vettes, you will see the light start to flash


3. When light stops flashing the CHANGE OIL LIGHT has been reset

Apr 21, 2009 | Chevrolet Corvette Cars & Trucks

1 Answer

Oil service reset


When "CHANGE OIL SOON" or "CHANGE ENGINE OIL SOON" appears on the Driver Information Center;
  1. Press "ENG-DATA" button until the "OIL LIFE INDEX" appears.
  2. Press the "ENG-DATA" button and the "RANGE" buttons at the same time until 100 displays (about 5 seconds).

This is what I found on your car bud. I hope that's what you're looking for. :)

Sep 21, 2008 | 1989 Cadillac Eldorado

Not finding what you are looking for?
2002 Chevrolet Blazer Logo

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...