Question about 1992 Honda Accord

1 Answer

Honda accord 1991 oil change

What tool or socket/spanner do I need to undo oil sump plug?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Honda Master
  • 1,779 Answers

You are referring to the drain bolt on the oil pan? You can use a crescent wrench. I have a 92 and I can never remember what size the drain bolt is, so I always go under with my trusty adjustable crescent wrench. Let me know if u need more info.

Posted on Nov 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How does one remove the sump from the Rocam engine of a 2005 Ford Bantam pickup?


    1.Loosen the wheel nuts on both front wheels
    2.Raise the front of the vehicle, both sides
    3.Removes the front wheels
    4.Remove the both side ball joint bolts and lift the suspension of the ball joint using a steel bar or similar,
    5.Remove both inner cv joints from the vehicle
    6.Remove the battery and the plastic battery housing;
    7.Remove the air intake pipe
    8.Drain the oil from the sump
    9.Remove the resonator from the gearbox, hydraulic hose from the gearbox, reverse gear switch, speedo cable.
    10.Remove the two bell housing bolts on the top (next to the cylinder head). Take one bolt to a local tools and hardware and source the exact thread bolt but buy bolts that are approx 5/6cm longer - buy 5 bolts to be safe. Replace the two bolts removed with the longer ones.
    11.Remove the starter motor and power cables;
    12.Remove the bolt above the starter motor and insert a long bolt here
    13.Next remove all bolts mounting the sump,
    14.At the back of the engine (side where the manifold is) remove all bolts and insert one long bolt. Note none of the long bolts should be mounted into the oil pan (sump).
    15.Use a support bar to support the engine and gearbox assembly (I made one using a steel pipe and bolted this onto the engine strut bolts;
    16.Using a 17 socket and long extension remove the gearbox mounting (3 nuts), Lower the gearbox side of the engine so that the mounting bolts clear the engine mounting;
    17.Insert a large screw driver or similar between the engine and gearbox assembly and separate them (note most gearbox will separate itself);
    18.You will notice a +/- 4 to 5 cm space between but the gearbox and engine is still joined together by the longer bolts.
    19.Using a long 8mm "t" socket as shown below, insert this between the fly wheel and onto the sump bolt (x2) and remove them. Using a normal 8mm spanner / socket remove all other sump bolts. The sump can now be removed from the vehicle.
    20.[Information for using a 8mm special tool: note that the Gedore 8mm or similar will not work between the fly wheel and sump]. I had bought a cheap small 8mm socket {it comes 8mm, 10mm and 12mm in a three way small socket - cost about R12} I cut off the 8mm from this and joined a long steel rod to it and also a handle which made is a "special" T socket spanner, similar to the image below.
    21.Install in reverse order as described above.

one-remove-sump-from-rocam-engine-2005-j5ekklqbg0r4og3swv24qsbc-4-0.png

May 13, 2013 | 2005 Ford Bantam 1.3i

3 Answers

How do i remove the oil pump


    1.Loosen the wheel nuts on both front wheels
    2.Raise the front of the vehicle, both sides
    3.Removes the front wheels
    4.Remove the both side ball joint bolts and lift the suspension of the ball joint using a steel bar or similar,
    5.Remove both inner cv joints from the vehicle
    6.Remove the battery and the plastic battery housing;
    7.Remove the air intake pipe
    8.Drain the oil from the sump
    9.Remove the resonator from the gearbox, hydraulic hose from the gearbox, reverse gear switch, speedo cable.
    10.Remove the two bell housing bolts on the top (next to the cylinder head). Take one bolt to a local tools and hardware and source the exact thread bolt but buy bolts that are approx 5/6cm longer - buy 5 bolts to be safe. Replace the two bolts removed with the longer ones.
    11.Remove the starter motor and power cables;
    12.Remove the bolt above the starter motor and insert a long bolt here
    13.Next remove all bolts mounting the sump,
    14.At the back of the engine (side where the manifold is) remove all bolts and insert one long bolt. Note none of the long bolts should be mounted into the oil pan (sump).
    15.Use a support bar to support the engine and gearbox assembly (I made one using a steel pipe and bolted this onto the engine strut bolts;
    16.Using a 17 socket and long extension remove the gearbox mounting (3 nuts), Lower the gearbox side of the engine so that the mounting bolts clear the engine mounting;
    17.Insert a large screw driver or similar between the engine and gearbox assembly and separate them (note most gearbox will separate itself);
    18.You will notice a +/- 4 to 5 cm space between but the gearbox and engine is still joined together by the longer bolts.
    19.Using a long 8mm "t" socket as shown below, insert this between the fly wheel and onto the sump bolt (x2) and remove them. Using a normal 8mm spanner / socket remove all other sump bolts. The sump can now be removed from the vehicle.
    20.[Information for using a 8mm special tool: note that the Gedore 8mm or similar will not work between the fly wheel and sump]. I had bought a cheap small 8mm socket {it comes 8mm, 10mm and 12mm in a three way small socket - cost about R12} I cut off the 8mm from this and joined a long steel rod to it and also a handle which made is a "special" T socket spanner, similar to the image below.
    Once the sump is off you will be able to remove the oil pump
    21.Install in reverse order as described above.

remove-oil-pump-j5ekklqbg0r4og3swv24qsbc-4-0.png

Dec 10, 2012 | 2005 Ford Bantam 1.3i

1 Answer

Changing transmission fluid


transmission fluid change is similar to changing the oil you need to find where the gearbox sump plug is and undo it and fluid will come out. to replace fluid with new pour it into where you check the fluid level

Feb 11, 2012 | 1991 Acura Legend

1 Answer

Hi, honda 2006 model showing the sign of a spanner on the screen


I just checked on that one, they said to disconnect the battery for 5 minutes, and the lights will reset? I have heard this but never had to try it. Your spanner is scheduled maint and the oil light you know. And they both should be resettable. Hope this helps.

Mar 08, 2010 | 2006 Honda Accord

1 Answer

How do i change the gear oil on my peugeot 106 roland garros


If you're not mecahnically minded, this isnt a job for you.
There is no filler cap for gearbox oil. The gearbox will have a level check plug, and a separte drain plug. Both will probably require a specific plug tool to remove (i.e. not just an ordinary spanner or socket), and can only be accessed from underneath the car.
Gearbox oil level has to be checked with the car level, so a garage will put the car on a lift so they can work underneath it. So, even if you jacked it up (never work under a car only supported by a jack ! Use ramps or axle stands as well) and could get at and undo the plugs, the car wont be level and therefore you wont put the correct amount of oil in.
Suggest you take it to a garage.

Sep 18, 2009 | 1991 Peugeot 405

1 Answer

1991 Accord 2.2L timing belt replacement


Hi,
yes standard right hand thread,the easiest way is with a very powerful air gun with an impact socket,be warned have had to use an 1 inch drive lorry gun to undo these bolts as have a compression washer under the bolt head,Good luck,

Aug 06, 2009 | 1991 Honda Accord

2 Answers

Loosing oil after oil change


Check your oil drain plug on the bottom of your oil pan (may be loose or stripped) and check the oil filter connection (may be loose or gasket is pushed to one side).

Jun 09, 2009 | 1991 Honda Accord

1 Answer

Changing oil on a volvo s40 diesel 2002


An 8mm plug spanner did the job.

Nov 22, 2008 | 1991 Volvo 940

1 Answer

Starter for a 1991 Honda Accord Station Wagon


You have no choice but the use the extended spanner. If I am not mistaken you need spanner number 14 ( metric )

Nov 13, 2008 | 1991 Honda Accord

1 Answer

Honda accord 1991 model


Sounds like it's burning oil-how many miles on the engine? If it is burning oil, the plugs will not last too long before they have to be replaced or cleaned, due to deposits left on them by the oil. How often do you have to add oil (how many miles do you drive before you have to add a quart?) It probably needs an engine overhaul. Countrycurt0

Jul 20, 2008 | 1991 Honda Accord

Not finding what you are looking for?
1992 Honda Accord Logo

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...