Question about 1990 Toyota Corolla

2 Answers

Need gapping info for toyota corolla AE-91 1.5l japanese domestic

What is the spark plug gap for my toyota corolla 1500 cc 4 cylinder japanese domestic model AE-91

Posted by on

  • 2 more comments 
  • Anonymous Mar 29, 2014

    what is the gap suppose to be

  • Anonymous Mar 29, 2014

    Spark Plug gap settings

  • Anonymous Mar 29, 2014

    Spark plug gap settings

  • vgbharucha Jul 03, 2014

    Up to 1999 0.9mm. From 2000 onward 1.1mm



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

The correct spark plug gap for the 1.5 litre engine is .032"

Posted on Nov 11, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi i need your help i want 2 know why while drivin i smellin gas i check every wrere no gas likin i want to know if i gap my spark puls it will mak a difrrent if i do how much fo gap it thank u

Posted on Jul 10, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What should the spark plug gap be set to?

the spec is .043", for both the V6, and the Inline 4. The theory behind enlarging gaps, is that a larger gap creates a larger spark, thus more effecient ignition. The problem is, your ignition system was designed for the .043" spark plug gap, not larger. Enlarging the gap puts a greater strain on your ignition system components, and it may not be strong enough to jump a larger gap. The result would be less efficient combustion, or a cylinder(s) that won't fire at all. Pull your plugs, and set them at .043". Check the distributor cap, rotor, wires, and your filters. Make sure the car is totally warmed up before the smog test. Good luck.

Jun 04, 2016 | 1990 Toyota Corolla

1 Answer

Step by step instructions on how to change the spark plugs on my 2006 Toyota Corolla

Obtain manufacturer recommended spark plugs for your vehicle with proper gap (.044 from toyota forum)
3/8 drive ratchet with extension and spark plug socket.
Only perform spark plug change on a COLD engine.
Remove one spark plug boot at a time, so as not to confuse wire location.
Remove spark plug number 1 and replace with new one, recommended torque is 150 inch/lbs from toyota forum, but if you don't have a torque wrench, just snug them up good, don't overtighten.
Same procedure 2,3 and 4 cylinders

Aug 17, 2014 | Cars & Trucks

1 Answer

What's the spark plug gap for a toyota corolla 1.6 1992

If you are using iridium plugs or bosch supper 4 ytou don't usually need to mess with the gap. Standard plugs should be set at 0.032"

Nov 10, 2011 | Toyota Cars & Trucks

1 Answer

Hi There I have a Toyota Sprinter AE-110 1997 model. i am planning to change my spark plugs To BOSH Iridium plugs. Is it ok to the engine system...? Does It make any Differences..? Thanks ASW

I would not spend that kind of money on spark plugs

Just install double platinum

Do not install Bosch with the silly 4 prongs etc
they won't work in some motors

Stay with the OE electrode shape

Spark plugs will make no difference what so ever
as to upgrading to Iridium

Sep 21, 2011 | 1997 Toyota Corolla

1 Answer

Where are you spark plugs on a 2006 Ford Fusion. I have changed many vehicles Spark Plugs but Im not familiar with this model and do I have to remove the intake manifold to get to them ???

Inspection & Gapping

Fig. Inspect the spark plug to determine engine running conditions

Removal & Installation

2.3L Engine

  1. Disconnect the negative battery cable.
  2. Remove the 2 nuts, the bolt and the alternator air inlet duct.

    0996b43f807cb98c.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Remove the 2 nuts, the bolt and the alternator air inlet duct-2.3L engine

  3. Disconnect the 4 ignition coil-on-plug electrical connectors.
    NOTE When removing the ignition coil-on-plugs, a slight twisting motion will break the seal and ease removal. Remove the 4 bolts and the ignition coil-on-plugs.

    WARNING Only use hand tools when removing or installing the spark plugs, or damage can occur to the cylinder head or spark plug.

    NOTE Use compressed air to remove any foreign material in the spark plug well before removing the spark plugs.
  4. Remove the 4 spark plugs.

To install:
  1. Inspect the spark plugs, as outlined in this section.
  2. Adjust the spark plug gap, as necessary, to 1.25-1.35mm (0.049-0.053 in.).
    WARNING Only use hand tools when removing or installing the spark plugs, or damage can occur to the cylinder head or spark plug.
  3. Install the spark plugs and tighten to 12 Nm (9 lb-ft).
    NOTE Apply a small amount of dielectric grease to the inside of the ignition coil-on-plug boots before attaching to the spark plugs.
  4. Install the 4 ignition coils and bolts and tighten to 10 Nm (89 lb-in).
  5. Connect the 4 ignition coil electrical connectors.
  6. Install the alternator air inlet duct and the 2 nuts and the bolt. Tighten to 6 Nm (53 lb-in).
  7. Connect the negative battery cable.

Oct 12, 2010 | 2004 Toyota Corolla

1 Answer

My camry gets slow on hot days and runs good in the night.I've already changed cables and radiator. it's a 91 2.0 4 cylinder.Thank you.

check your spark plug gap. It may be gapped to run hotter.
I would run radiator coolant with 60% water and 40% coolant. More water is better in the summertime.
Also a cold air intake and 5w 30 oil would help

Jul 25, 2010 | 1991 Toyota Camry

2 Answers

I need the spark plug gap for 94 carolla w/ 1600 cc engine

it will read on a sticker under the hood usually where the engine specs are

Mar 11, 2010 | 1994 Toyota Corolla

Not finding what you are looking for?
1990 Toyota Corolla Logo

Related Topics:

854 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides