Question about 1988 Ford F 350
It has the 460 motor
The fuel pump relay it located under the hood on the driver side (top) close to the fire wall i had to replace mine today
Posted on Dec 07, 2008
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
unplug the injectors 1 at a time to listen to change in the way i runs,locate the cylinder that doesnt really change and inspect the plug,wire and if good then it may be a dirty or clogged injector,try addind seafoam to the gas and drive it for a while,it may smoke for some time but it should clean the injectors and valves really good.if it used oil alot before it may be carbon on the valves which seafoam helps clean them or you can squirt cold water in a spray bottle into the intake while running and the water explodes the carbon off the valves but it can not be really hot or damage to the valves will happen
Posted on Aug 19, 2009
Did you check the fuel inertia switch in the passenger side kick panel ?
The fuel pump is powered :
the fuse to the fuel pump relay.
The fuel pump relay to the fuel inertia switch
The fuel inertia switch to the fuel pump itself.
At the fuel inertia switch in the kick panel, power from the relay is the Dark Green w/ Yellow stripe wire and the pink w/ black stripe wire is the power. from the fuel inertia switch to the fuel pump.
If you jumper the fuel pump relay, you should hear it run. If not pull the fuel pump relay, and check the pins in the relay socket, pin 30 should be the power from the fuse.
If you have power at pin #30, jumper the relay socket as shown with the red line above, and check the dark green w/ yellow stripe wire at the fuel inertia switch for power.
Press the button on the top of the fuel inertia switch, and check for power leaving the fuel inertia switch on the pink w/ black stripe wire.
This is tests good, check for power at the fuel pump, same pink w/ black stripe wire.
Fuel inertia switch info is in the owners manual, If you did not get an owners manual with your truck ( purchased used ), you can download one from Ford :
Posted on Jan 03, 2010
SOURCE: install fuel pump 1974 f350 460
first disconnect the battery then disconnect the fuel lines from the pump remove the 2 bolts remove pump the reverse procedure remember to put a dab of grease on top of the arm that goes inside the engine
Posted on Jul 12, 2010
Tips for a great answer:
Apr 24, 2017 | Ford Cars & Trucks
Mar 25, 2012 | 2006 Ford Expedition XLT
Nov 27, 2010 | 1989 Ford Bronco
Jul 17, 2010 | 1986 Ford F 250
Jun 03, 2010 | 2000 Ford Focus
Apr 23, 2010 | Ford Escort Cars & Trucks
Feb 28, 2010 | 1993 Ford Explorer Limited
May 10, 2009 | Ford F-350 Cars & Trucks
Jan 14, 2009 | 2005 Ford Excursion
Sep 09, 2015 | 1988 Ford F 350
3,329 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: