Question about 1998 Jeep Wrangler

1 Answer

1998 Jeep Wrangler will not start

There is a flashing red light going off as if it were a security alarm. However i do not think that there is one in my jeep. I can turn the key all the way to try and start it, but it does not even attempt to start. The ac and radio work when i turn it all the way just not the car.

How do i get my jeep to start!

Posted by on

  • kreacher23 Nov 11, 2008

    I have used the same key for the few years i have had it... and the flashing light keeps going. it has stayed on for about a day now

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

It must have a security key that means the switch key has a small chip in key

Posted on Nov 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1999 jeep wrangler alarm(avital) goes off and battery is dead. I jump started the car and was able to drive it back home. But when turned it off the battery dies again and alarm goes off. Car is...


is this a post for non stock parts, added to car?
why not ask the maker of this, no jeep shop will help you, its NOT JEEP.
http://www.avital.com/

if i had it ,it be UNINSTALLED in a flash,
never do hack up cars
if you do and then are far from home, nobody anywhere on the road
can help you, its all custom stuff.
think about that..... run a stock car if a serious driver.
or lean to fix those custom parts your self. totally.
i have classic cars and custom systems. but im fully documented.

Oct 08, 2014 | 1999 Jeep Wrangler

1 Answer

I did a 98-350 chevy swap to a 98 jeep wrangler. It starts and then stops after about 2 seconds.I think the security system in the ECM is shutting down & not letting the injectors fire. Is there a way to...


asd is shutting down the fuel sounds like 2 seconds is the inatal fuel supply for primimg check the asd relay and the 15 amp asd fuse should have power only when enginge is turning or running

Oct 04, 2013 | 1998 Jeep Wrangler

1 Answer

2003 Jeep Wrangler alarm sounds in cab but no indicator lights flash


The beeping alarm would be for leaving the key in the ignition or the lights on. Maybe a gauge that had dropped to zero.
Let us know if it happens again and what the conditions are.

Aug 13, 2012 | 2003 Jeep Wrangler

2 Answers

Reset the security system after changing the batter - diesel Ram


insert key turn to on position alarm should silence
once bat conected start truck

Jan 22, 2010 | 1997 Dodge Ram 2500 Club Cab

1 Answer

My jeep wont start. The alarm went off so I


this is a warrenty issue. have the dealer look at it.

Nov 18, 2009 | 2008 Jeep Wrangler

1 Answer

Security light flashing wont let you start jeep


the alarm seems to be activated. press the button and turn the key.

Aug 12, 2009 | 1995 Jeep Grand Cherokee

1 Answer

98 Jeep Wrangler with Alarm Problem - Installed by Marietta Jeep


Your vehicle has 2 ignition wires that you can put back to factory, and start the vehicle.
The wires you are looking to put back together are (blue) and (black/orange) - and found under the D/S dash. (ignition harness) They will be larger in Diameter than the others.
They were cut to install the security system. They go into the "brain" and out the other side. A relay inside the BRAIN is most likely failing.
If you no longer want the alarm installed, simply match up all of the factory colors. Use crimp-on ****-connectors for secure connection.
Let me know if you need more help.

Jan 13, 2009 | 1993 Jeep Cherokee Country

6 Answers

Jeep alarm will not turn off


The ignition security on/off is located at the trunk lock. unlock and lock rear gate and the alarm will turn off. My jeep sat in my drive for a month before a jeep tech told me this. It still triggers the security sometimes when I unlock the passenger door with the key and I go straight to the rear gate lock and it shuts off instantly.

Jun 27, 2008 | 1994 Jeep Grand Cherokee

Not finding what you are looking for?
1998 Jeep Wrangler Logo

Related Topics:

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

71338 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7018 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...