Question about 1965 Ford Mustang

2 Answers

Need diagram i need a wiring diagram for a 1965 ford mustang heater switch & blower motor

Posted by on

  • 2 more comments 
  • john earley Nov 11, 2008

    do you know where i can get a wiring diagram for a 1965 ford mustang ?

  • paul erickson
    paul erickson May 11, 2010

    FixYa.com claims they have factory repair manuals, they have nothing of the sort, this is not to say some experts may have manuals, we do, but we work from home and in most cases have a small library. Experts are not employed by FixYa.com, we help free of charge as much as we can with the general automotive knowledge we have learned while working as auto technicians, specific test values, repair procedures and illustrations are unique to each car line, these are not in most cases available to us. Thanks for using FixYa!

  • Anonymous Mar 21, 2014

    diagram of heater blower assembly

  • Anonymous Mar 24, 2014

    Iwould like to know the recommended radiator cap pressure of my 1965 ford mustang 289ci without con

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 94 Answers

Hi pgarrity,hope this helps my friend good luck,this is simplified :)need diagram - 38282e1.jpg

Posted on Nov 11, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 674 Answers

Here is a full diagram but its for a 66
66 mustang

hope this helps
later paul

Posted on Nov 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1965 falcon sedan resistor


Ignition ballast resistor is usually mounted on the firewall near the back of the engine. It's white, rectangular, and has a wire connector on each end. It's function is to limit primary coil current during engine running. The ballast is bypassed during starting so you get a higher spark voltage. If you remove the ballast, you will burn out your coil.

Feb 23, 2014 | Ford Falcon Cars & Trucks

1 Answer

I need the wiring diagram for the plugs that come out of the bottom of the steering column on a 1965 mustang


the last one i worked on didnt have any plugs out of the steering column ,think that was a 65 or 66 model

Aug 27, 2010 | 1965 Ford Mustang

1 Answer

Fuse diagram for a 98' E-150 van specifically for heater fan


owner manual will tell you fuse layout. If you have only high speed, you have a bad resister. 4 wires.

Resistor —Heater Blower Motor Switch Removal
  1. Remove the battery (10655) ; refer to Section 414-01 .
  1. Remove the battery tray.
    1. Remove the screws.
    1. Remove the battery tray.
  1. Disconnect the heater blower motor switch resistor connector.
  1. Remove the heater blower motor switch resistor (18591).
    1. Remove the two screws.
    1. Remove the heater blower motor switch resistor.
---------------------------------

0f120f5.gif

Feb 26, 2010 | 1998 Ford Econoline

1 Answer

Need spark plug wiring diagram for 1965 ford


Try this. If the distributor is in the right way, the clips that hold the cap on should be just a hair off of 12 o'clock and 6 o'clock. #1 is positioned at 1 o'clock, which is at the firewall side of the distributor. The firing order is 1-5-4-2-6-3-7-8and is counterclockwise from #1. The passenger's side is cylinders 1-2-3-4, from the front of the car. The driver's side is 5-6-7-8 from the front. Hope this will help.

Feb 06, 2010 | 1965 Ford Mustang

1 Answer

My Blower motor for my heater on a 99 ford escort is not working.Is it the motor or resister that is gone??the fuses look ok where is the resister located can you send a diagram


look in passenger foot well on blower case for 4 wire connector.



Behind right side of I/P, A/C-heater plenum


resister bad would still allow high speed. may be blower motor.

  • The blower motor does not operate/does not operate correctly
  • Open fuse.
  • Tripped circuit breaker.
  • Circuitry open/shorted.
  • Heater blower motor switch (18578).
  • Heater blower motor switch resistor (18591).
  • Blower motor relay.
  • Blower motor.




bfddb09.gif

Jan 16, 2010 | 1999 Ford Escort

1 Answer

Put in new wire harness but cannot get heater motor to work there is power at the motor and switch on 65 ford mustang late 1965bigg


Your motor has power you have lost your ground,you can run a test wire and ground it, if it works you found your problem if not the motor is bad,I hope this helps you and thank you

Sep 11, 2009 | 1965 Ford Mustang

1 Answer

Got a 65 mustang coupe and the heater blows cold air. It's Dec and this is the wrong time to look cool in my ride. any troubleshooting suggestions on how to remedy the problem>


To verify you have hot water going into the heater core, remove the two hoses for the heater from your engine and see if you have water running through the core. There is a possibility that your heater core is plugged. If that is ok, then your next best thing is to check your cables running to the heater to verify it is not broken. Lastly, check the heater switch to blower motor resistor on the front of the heater box. It may be broken.

Dec 06, 2008 | 1965 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

959 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...