Question about 2000 Renault 181

1 Answer

New battery .have code but cant get it to accept..no manual

I have a new battery. I have the code put it in but what do i press after last number??...plz help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Renault Master
  • 21,949 Answers

Thinks me its number five or fm/mw button

Posted on Nov 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant get the car to stay crank what could be problem


Probably needs a new starter motor, have it checked at a auto parts store. Make sure good connections at battery of course first. Those motors don't last forever.

Dec 14, 2014 | 1999 Dodge Stratus

1 Answer

Wrong terminal put on battery


The power trains engine computer is always on linked to the battery. You will need to replace that before anything else can be determined wrong or burnt out as well

Jun 29, 2010 | 2001 Toyota Echo

1 Answer

My 1995 bmw318ti cant start but i bought a new battery.wats the problem


Usually have to get a "software" reset at the BMW dealership as the car is NOT accepting the new battery!!

Mar 10, 2010 | 1996 BMW 318

1 Answer

I just bought a 1995 Lincoln Continental. How do i reprogram the keyless entry on the driver door


After entering the 5 digit code that is currently installed, press the 1/2 button and enter your new 5 digit code. After entering your new code, press the last 2 buttons (7/8 + 9/0) at the same time. This will confirm your new code has been accepted. Keep in mind, in case of loss of power, the keyless entry will revert back to the original code. Best of luck.
Greg

Jul 26, 2009 | 1995 Lincoln Continental

1 Answer

Can not get my radio to accept the code


I think after you enter code you have to push last preset #6

Apr 25, 2009 | 1994 Acura Legend

1 Answer

Keypad reset. Now that I have the original keypad code, how do I change the code?


your owner manual tells you. Why not use the original code?

To change, here is 96 procedure, should be the same. please give good rating if this is what you want.

Entry Code The system (permanent) entry code is located in three places:
  • on the owner's wallet code card (in glove compartment)
  • electronically accessible by requesting the remote anti-theft personality module KEYCODE PID on the New Generation Star (NGS) Tester
  • on the remote anti-theft personality module housing
The remote anti-theft personality module is programmed at the factory with a five-digit entry code. A replacement remote anti-theft personality module includes replacement labels and a new owner's code card. To turn on the interior lamps and light all illuminated components:
  • press any button on the keyless entry keypad (14A626).
To program a temporary access code:
  • Enter the permanent code on the keyless entry keypad.
  • Press button 1/2 within 5 seconds of last digit of permanent code. (This alerts system to accept temporary code.)
  • Enter alternate five-digit code. Do not exceed 5 seconds between entering digits or between pressing the 1/2 key and entering the first digit.

Apr 08, 2009 | 1995 Ford Taurus

3 Answers

Need Toyota radio security code


Oribeeboy is spot on for a 100 series Landcruiser - last 3 VIN numbers.
Let's say the last 3 VIN Nos were 264
Turn the ignition key so that the radio displays "SEC"
then: press "TUNE"and press No1 button on the radio at same time
then: press No1 button 2 times
then: press No2 button 6 times
then press No3 button 4 times
Finally hold the "SCAN" button to confirm the code. The radio will then turn itself off. You can then turn it on in the normal way.
(Hopefully!)

Mar 16, 2009 | 1997 Toyota Camry

1 Answer

Cant enter my car radiocode ???


Turn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.

Nov 26, 2008 | 2001 Audi A4

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...