Question about 2004 Ford Focus

1 Answer

ABS warning light

My abs warning light and parking light wont go off in my ford focus but there is nothing wrong with my car can you tell me the problem please

Posted by on

  • Anonymous Nov 12, 2008

    Same as abbott490's ..The 2 warning lights come on but the brakes are good. (as stated by Ford tech and outside mech.) Ford wants to replace main ECBM module? Does the 2004 focus have a Longitudinal accelerometer sensor? I found that on line, but don't know if its in the Focus. The Emergency brake Lever does make a clicking sound (Solinoid) when the lever is pulled. When the Emergency lever is pulled the warning lights go out

  • firefight966 Feb 20, 2009

    Brake light and ABS light on 2004 Ford Focus will not go out after changing rear brakes



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 962 Answers

The Electronic Brake Control Module is a little part but costs a lot of money. I don't know about the Longitudinal accelerometer sensor. I know other cars do have it.

Posted on Nov 15, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I turn off the warning lights on my car if there is nothing wrong but the ABS light stays on?

Go to another mechanic. The light is on because there is an ABS problem. It is usually sensors and the error code will tell you which one.

May 13, 2016 | Buick Lucerne Cars & Trucks

1 Answer

How do i reset ABS and traction control warning lights on a 2008 ford focus

if there is light o the panel you may not reset it , you must go to scanner to detect which problems occurs on the abs ..

Feb 10, 2014 | 2009 Ford Focus

1 Answer

Abs warning light is on

You may have accidentally damaged the wheel speed sensor. Have it scanned to find out which one.

Nov 24, 2013 | 2001 Ford Focus

1 Answer

57 plate, Ford Focus Zetec, 1.8 diesal. ABS warning light,Steering Failure Assist light and Battery light on again. Alternator replaced 9 days ago, and been sluggish,heavy steering since and now won't...

2009 Ford Focus Zetec, 1.8 diesal. ABS warning light,Steering Failure Assist light and Battery light all on. Can't steer car. Then takes twenty minutes to restart car. Any ideas?

Dec 26, 2010 | 2008 Ford Focus

1 Answer

Ford focus has the ABS brake light on and traction control light

chek the brake fliud level. if low light will set light and abs wont work.

Apr 25, 2010 | 2003 Ford Focus

1 Answer

1996 Ford Windstar 3.8L, Brake light is on-brakes work fine

Abs light on means the ABS sytem has a fault.
You can determine what is wrong by counting the flashes (they say) and then put the data in on the web.

IE abs, windstar, failure, 3 flashes.

The brake light on is most likely picking up on uneven brake pressure, or a failing master cylinder/
You may not feel any difference yet, give it a little time, feel for a pedal fade at a light.

Jan 23, 2010 | 1996 Ford Windstar

2 Answers

My ABS warning light keeps flashing on my Ford Focus 2004 Model. what could be the problem?

your problem could be a damaged wheel speed sensor or wiring to the sensors.
or it could be a damaged abs ring

Jan 04, 2010 | 2004 Ford Focus

1 Answer

Ford focus-99 abs module

if the ABS system is functional u will have no ABS warning light showing in the dash except when u first turn the key on, that is a prove out to show the indicator light is working. If the ABS has a problem of any kind the light will always stay on when driving and the system will be disabled..

Jan 22, 2009 | 2000 Ford Focus

1 Answer

2000 focus zx3 abs or not

turn your car to the on position with out starting the car
if there is a light that says abs then you have it if not then you dont lol
hope this helps

Dec 27, 2008 | 2004 Ford Focus

Not finding what you are looking for?
2004 Ford Focus Logo

Related Topics:

851 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers


Level 3 Expert

5572 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides