SOURCE: PARKING BRAKE 96 GEO METRO
It cant be adjusted. You brakes are bad or something is messing up the auto adjustments. Clean the brakes and turn the drums if you can. If not clean the drums good with sand paper and wash it down well. DONT use water of course but a good brake cleaner.
PS a trick I use to tighten up my brakes is to have the drum off of one side. Push the brakes down slowly until I here a click or two and re install the drum. You dont want it too tight of course. It should spin freely. My brakes would be very good for a couple of months.
SOURCE: THE FIRING ORDER FOR A 1992 GEO METRO
The firing order is 1-3-2, distrubtor rotates counter clockwise. looking at engine from front of vehicle cyl. # 1 will be on your left cyl.# 2 center and cyl.# 3on your right.
SOURCE: geo metro radio
Hello uncletimothy, my name is JShreader. Thank you for choosing fixya.com.
I uploaded the Wiring Diagram you requested for the Radio Circuit in .pdf format. You can download it by clicking HERE. I hope this helps you. If you have any more questions or need any more diagrams, please don't hesitate to ask...Thanks again, JShreader!
SOURCE: 1990 geo metro engine surges up and down when
hi sounds like your engine is surging due to incorrect mixture now your idle screw is on the thottle cable were it connects to the carb and the mixture screw is on the carb body as an approx guide turn the mixture screw fully in then out two and a half turns that should help but y may need to fine ajust later
SOURCE: do the valves need to be adjusted on a 92 geo
No. Geo Metros use hydraulic lifters which can not be adjusted. If you Metro is making excessive valve noise, the lifters are probably worn out or the oil level is low.
194 views
Usually answered in minutes!
×