Question about 2000 Chrysler Concorde

1 Answer

Drain plug took drain plug out of my 2000 chrysler concorde to do raditator flush cant get it back in is there a trick to it

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 94 Answers

Hi billd1304, there is no trick to this other than being square with the threads on the rad. One question is it a steel pet-**** type or a plastic plug? both will be right hand thread hope this helps,good luck

Posted on Nov 11, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2000 chrysler concorde turns ok to the right but barely turns to the left.its like no powersteering to the left

Would you like us to guess at something for you,
without having the vehicle to look over?

Have you checked for fluid leaks?

Considered you have to flush the fluid
every 3 years ,or the steering rack fails?

Mar 10, 2014 | 2000 Chrysler Concorde

1 Answer

Where is the fuel tank drain plug on 2004 Chrysler concorde

You having a laugh ? drain plug on a car ,their hasnt been a drain plug fitted to a modern car since the 50s

Apr 13, 2013 | 2004 Chrysler Concorde

1 Answer

Cant find the drain plug on the oil pan for my 1999 chrysler concorde lxi

The oil drain plug is located on the side of the oil pan, passenger side. It does not look like a typical drain plug, as it's one of those quick drain type. It is meant to be hand loosened and tightened. DO NOT OVER TIGHTEN or you are in for a world of hurt. Just firmly finger tight

Sep 04, 2012 | 1999 Chrysler Concorde

1 Answer

2000 chrysler concorde valve body

The valve body is located inside the transmission, you must remove the bottom pan to access it, a very messy job as there is no drain plug for the fluid, about 3 quarts goes all over unless you have the correct catch basin to collect it.

Jul 24, 2012 | 2000 Chrysler Concorde

1 Answer

Oil light comes on and then car overheats

i just had changed the oil in my wifes 2.7 2000 260,000 mile concord.
i got a very unhappy phone call about oil light on and over heating .
shop wanted $750 to fix . i drove it home no light till about 15 minutes into drive. checked oil it didn't even regester .waited a few minutes oil was back. ended up being the pcv valve was pluged and line to it had
rotted off . it was holding the oil in the valve cover and causing it to leak
around plugs and burn oil . cost of fix $20. i used a radiator bypass hose and a new pcv valve . works great .still burns quart of oil every 1,000 miles because of milage .i hope this info will be useful to you.

Jul 05, 2012 | 2000 Chrysler Concorde

1 Answer

Oil drain plug is leaking

try changing the gasket on the drain plug, or a new drain plug. Can be bought at your local parts store

Feb 05, 2011 | 2000 Chrysler Concorde

1 Answer

I have a 2000 Chrysler Concorde and the Oil sensor light came on. it was down a quart of oil and it has only been 5000 miles since last oil change. Had oil change done and within 6 miles the oil sensor...

I'm betting that this is the 2.7L engine. If it is, you may have caught this in time. There is a very good possibility that the oil pump intake has become plugged with sludge. You will have to have the oil pan removed so that the pick-up can be cleaned and the engine flushed out. After that you must use synthetic oil. This was a huge problem, lawsuits galore. Google: "2.7L sludge" for more info.

Apr 30, 2010 | 2000 Chrysler Concorde

1 Answer

How to remove chrysler concorde radiator drain plug

locate the drain plug usually a plastic butterfly plug on the back side of your radiator but make sure to cool off the coolant first as this could give a serious burn. turn its counterclock wise and bingo drain the water off..

Apr 07, 2010 | 2001 Chrysler Concorde

1 Answer

How do i find the oil drain plug in 2001 concord

Its at the bottom of the car. But b4 you open it get something high and a basin with a furnel and open the lead near the engine at the bottom of the car

Nov 11, 2009 | 2000 Chrysler Concorde

Not finding what you are looking for?
2000 Chrysler Concorde Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

79847 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides