Question about 1995 Toyota Tacoma

1 Answer

Rear lights not working

Hi, i have a toyota hilux/tacoma that rear lights, instrument light, interior lights, positionlights front and rear, trailer connector does NOT work.
BUT position indicators, daytime running lights, brake light, reverse light does work.

I have checked fuse 7, 10Amps = OK
bulbs = OK

What can the problem be, are there any wiring diagram to get any where?

best regards Tina from sweden

Posted by on

  • 2 more comments 
  • tinahylander Nov 10, 2008

    Hi,



    That fuse have been checked its no7 according to manual, but ALL fuses have been checked and no one is broken. I even replaced the Tail fuse just in case it looks whole but are broken. still the same fault. There are no visible corrotion in the trailor connector.



    regards Tina

  • heliax877 Apr 03, 2009

    Hi I am having the same exact problem- how did you fix this?? I have NO blown fuses - checked with a multimeter

  • Toyota Ed May 11, 2010

    The power sequence is as follows:

    Battery - 80 amp ALT fuse (under the hood) - taillamp relay (under the hood) - 10amp PANEL and 10 amp TAIL - The TAIL fuse branches off, thru the integration relay, which powers the rear lamps/number plate lamp. It also branches another way, straight to the rear marker lamps. The PANEL is for the instrument lighting.

    If you just had marker lamps, and no brake lamps, I would suspect the integration relay. But, since you have brake lamps, the integration relay is not the culprit, and good that it is not, because it is expensive.

    You are checking the fuses with a test light, not just visibly inspecting them?

  • Toyota Ed May 11, 2010

    Look for a blown "Tail" fuse.

    If it is blown, My first opinion is the trailer harness. This is the number one cause for fuses blowing; Check the trailer connector for obvious corrosion. Then get back to me.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 450 Answers

Toyotas sometimes have multiple power wires coming off of the battery to fuse blocks. One of these wires may be broken. Electrical schematics are available on-line or in repair manuals. If you don't have one, go to the library and look in the repair manual section.

Posted on Oct 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Break lights stay on,dash lights come on with break peddle..


I'd say you have a short in one of the rear light clusters, or possibly somebody wired a trailer socket wrong. Your dash lights are back-feeding from the rear brake light.

Feb 11, 2015 | 2011 Toyota Tacoma

1 Answer

How to wire trailer lights to a toyota tacoma


The easiest way is to get the kit that plugs into the taillight harness to adapt your plug. If one isn't easily available then you can use scotch locks to splice into your trucks harness. Use a test light to make sure you locate the right wires in your trucks harness and go by the wire diagram on the instructions from the plug to hook it up.
I hope this helps!

Jul 22, 2010 | 2002 Toyota Tacoma

1 Answer

I would like to know the wiring diagram for the rear brake lights, turn signal's and parking lights to install a trailer harness on my 2006 toyota tacoma


Search Toyota Schimatics online there are a few websites that can help you with that, Toyota is pretty good about shearing information about their product and makes it easy to fix your car yourselves. Hopes this helps

Mar 05, 2010 | 2006 Toyota Tacoma

1 Answer

Trailer signal lights are dim when hooked to '04 tacoma


Look for ground issue, in my opinion the frame should not be used as a ground, always makes problems, eventually, but run an external ground to the lights and view results....

Sep 15, 2009 | 2004 Toyota Tacoma

1 Answer

2001 Toyota Tacoma- turn lights not working and cruise control


fuses???
Check relays.....
Harness grounds, engine ground,
Check the trailer harnes for short.
Vitally

Jun 02, 2009 | 2001 Toyota Tacoma

1 Answer

No running lights and interior?


I have not heard back from you, did you locate the fuse in the fuse box under the dash? Thanks.

Feb 20, 2009 | 2005 Toyota Tacoma

1 Answer

2003 Sienna tail lights don't work when headlights are on


Look under the dashboard, next to/above the park brake pedal, for the interior fuse box. It has a black plastic cover. Remove the TAIL fuse, and see if it is blown. This should get you fixed up. Hope this helps, and Thanks for choosing FixYa.

Nov 11, 2008 | 2008 Toyota Sienna

1 Answer

2007 Tacoma Tail light problem.


Check the taillamp fuse on the truck. If it is blown, you either have a short in the wiring of the camper, or the 7 pin inverter box on the camper.

Oct 27, 2008 | 2007 Toyota Tacoma

Not finding what you are looking for?
1995 Toyota Tacoma Logo

611 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...