Question about Chevrolet Blazer

1 Answer

I have a 2000 Blazer and after some repairs at the Chevy dealer I still have no 4 wheel drive. They replaced the actuator switch and dash switch , but still no go!!!

Posted by on

  • yadayada
    yadayada May 11, 2010

    If they charged for the repair take it back and make them fix the problem.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Thats because its a gm general main

Posted on Nov 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Problems with chevy s10


have the actuator (mounted on the drivers side transfer case) checked. that is what makes the selection from 2-4 hi-4 low. it takes the place of a gear shift. they are a fairly inexpensive and easy repair (if thats the problem). i would start there providing you have checked the fuses and relays. i hope this helps.

Jan 31, 2014 | Cars & Trucks

3 Answers

2001 chevy s-10, has 4-wheel drive buttons on the dash. Will switch from 2 wheel to 4 wheel drive on its own. Any ideas as to what is going on?


I wouldn't hesitate to start by replacing the switch. They are know to go bad. It will simply pop out of the dash and unplug. You can find a new one for about $25 at your local NAPA or you can also find them at the dealer.

Aug 24, 2011 | 2001 Chevrolet Blazer

1 Answer

96 Chevy Blazer will not shift into 4 wheel high. Had it on a lift and it will shift into 4 wheel high low but nothing on the dash or at solenoid on 4wd high. I removed harness and saw no corrosion. ...


on the top side by where the front drive shaft comes out of the transfer case there is a vacuum switch with 3 vacuum lines going to it that needs replaced if im thinking right ..... replace switch and ur fixed........hope it helps

Nov 22, 2010 | Chevrolet Blazer Cars & Trucks

1 Answer

I got my 2002 chevy blazer with ZR2 package into deep water and shorted out my 4 wheel drive control module (located under the kick plate on the passenger side). I took the module out and had it replaced...


what sounds like is happening is the front end is not disengaging, it will not hurt it to drive without the module, but you need to find out why the front diff. actuator is not releasing. their is a shift motor on the transfer case, module and switch in the cab, and actuator on the front diff. all are susceptable to water, I would suggest getting a manual on it to aid in diagnostics

Oct 13, 2010 | 2002 Chevrolet Blazer

2 Answers

4 wheel drive is not working on a 2000 blazer


Check the electric control actuator on the front drive axle.

Feb 16, 2010 | 2000 Chevrolet Blazer

2 Answers

2000 blazer 4 wheel drive problem


It's most likely the "four wheel drive actuator" This is located on the front differential housing. It's cylindrical shaped and has a large hex (about
1-1/4") and two wires coming out of it. Usually they short out and blow the fuse but, I've also seen where they just quit working and sometimes they just get slow to work. The "actuator" has a heating element in it and it warms up, some sort gas, causing it to expand thus engaging the front wheels. In cold weather it may take a minute or so for it to engage, so put in four wheel drive and wait for a bit and see what happens.

Jan 05, 2010 | 2000 Chevrolet Blazer

1 Answer

4 wheel drive service light on the dash panel lit up on my 2000 chevy blazer, cannot push any buttons for 4 wheel drive to work, what could be the problem


most common problem is the TCSCM meaning transfer case shift control module,get back to me if you need more help PS this is not a cheap part

Dec 09, 2009 | 2000 Chevrolet Blazer

2 Answers

1998 chevy s-10 blazer. 4 wheel drive does not


do u have a lever control on floor if yes check adjustment of linkage if u have the dash switches check fuse and relay than check actuator for proper movement at transfer case actuator has a tendency to stick lube and or adjust

Oct 29, 2009 | 1998 Chevrolet Blazer

3 Answers

How replace turn signal switch 2000 chevy blazer?


Since the 2000 chevy blazer is equipped with SRS (Saftey Restraint System), ie: Airbags, which is located in the steering wheel. In order to replace the turn signal switch you must remove the steering wheel. Therefore I would only highly advise you to take it to a dealer to have this done.

Oct 07, 2009 | 2000 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...