Instructions1 Clean the positive and negative battery terminals to ensure a good connection with the tester's clamps.
2 Connect the positive and negative clamps to the appropriate battery terminals. The clamps must make firm contact with the battery terminals or the test results will be inaccurate or the tester may not work at all.
3 Turn the tester on and choose the option for "full charging system test." This will test your battery, starter and alternator and provide the most accurate picture of the problem.
4 Follow the directions on the tester's screen. These instructions will include cranking the vehicle after the battery test is performed, holding the engine at a certain RPM range and turning on certain accessories.
5 Read the results displayed on the tester's screen. The tester should scroll through the results, starting with the battery, then the starter and finally the alternator. An alternator test result showing diode ripple problems indicates a bad alternator.
Thanks
214 views
Usually answered in minutes!
×