Question about 1987 Ford Bronco

1 Answer

Power window not working

I have an 87 ford bronco and the passenger window stopped working. How do I replace the motor?

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

It is easy to replace, there are four rivets holding it in place. I just replaced my window motor. I used a flat head screw driver to break of the rivets. You want to make sure the window is held in place while you remove the rivets. Once I removed the rivets it can out with out a problem. Then when I remounted it I used 4 bolts and four locking nut. I think they were 1/4 nuts and bolts.

Posted on Nov 16, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Power window main switch won't work for drivers side window 1987 ford bronco 11

replace switch! if still don't work check the window motor!

Feb 09, 2013 | Cars & Trucks

2 Answers

87 ford bronco has no electrical power

Do a voltage drop test on the battery positive cable. Read how at the link. Voltage Drop Testing

Jun 16, 2017 | 1987 Ford Bronco

1 Answer

I'm trying to replace the power window motor on the passenger side in my '91 Ford Bronco. I've removed the door panel, but how do I get the rest off??

you have to take off the arm to get the motor off... normally its four bolts holding it on... two at the top and two at the bottom. you also may need to take the window off the track.

Nov 13, 2010 | 1991 Ford Bronco

1 Answer

Trying to correctly put vacuum lines on an 87 Ford Bronco w/302. Where does the PVC line supposed to lead to?

It goes behind the intake on the passenger side if you have fuel enjected motor it's a little bit tough to reach or even see but that's were the factory line runs

Jan 29, 2010 | 1987 Ford Bronco

1 Answer

89 ford bronco driver and passenger power windows roll down but wont roll up with out help they just sit thier and make a jerking motion up and down in the same spot

likely is an issue with the motor itself, or could possibly be due to dirt/rust in the way on the track. best to take the forward window panel out and check if it is blocking the way otherwise replace the power window motor.

Dec 28, 2009 | 1989 Ford Bronco

1 Answer

Windshield whipper fuse were is it for a 1987 ford bronco. Cant find whipper fuse to check it.

Below is the fuse lay out for 87 bronco, no wiper fuse is mentioned. if they do not work i would check to see if the wiper motor is getting power, if so then replace wiper motor

Oct 27, 2009 | 1987 Ford Bronco

1 Answer

Both driver and passenger pwr windows won't work.1990 bronco 2

see if you have power switches . then try replaceing the driver side switch frist. if that duse not work then you will have to re place the windo motors.

Jul 08, 2009 | 1990 Ford Bronco

1 Answer

Passenger window motor '86 bronco

take off the door and replace it with manual doors or check bronco graveyard for a motor

Aug 27, 2008 | 1986 Ford Bronco

Not finding what you are looking for?
Cars & Trucks Logo

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

5613 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides