Question about 1998 Chevrolet K1500

1 Answer

8 way power seat swap for power heated seat

I have a 1998 K1500 with power seats (no heat) I have access to a pair of 1998 heated seats. Are they a direct replacement for wiring or is there a different harness? My thoughts are tha the same wiring with an additional pin connecter for the heated seat.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I put new cars to gether an if it doesnt hav the acessories it wont have the harness u need,,maybe sumtymes they do but if ucan run aseperate switch itll work use the right amp rated wire or ull have more heat (fire)?thats about 12feet of wire they can save they will save if possible(wire harness) too bad i cant fix my own car thou,,,lol..

Posted on Dec 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am swapping in leather seats. New drivers seat is 10 way, with memory and heat. What wires should have 12v and ground to get power to the seat?


And it won't. You probably jumped too many years, And definitely the plugs. 6 to 10. Power and ground is there, Just at the wrong spot. You need pin outs for both. Alldatadiy.com. You can buy them both.

Mar 26, 2016 | 2006 Ford Explorer XLT

1 Answer

2007 Equinox drivers seat will not heat...light goes off after a minute.


I finally got out my ohm meter and the circuit diagram and checked out all the wires. Turns out the problem was an open circuit in the drivers side seat heating pad. The connectors are fairly accessible under the seats. The circuit is rather involved since the control module is under the passenger seat and the inputs come from the switches on the dash through the climate control module!! What a complicated execution for heated seats!
But I was able to find some new replacement seats on Craigslist and picked one up for $100. It was pretty easy to replace with just the 2 bolts at the back, the wiring harness underneath and the shoulder belt clip. Now everything is working and I sold the old seat for $60. A ne $40 repair and 3 hours of diagnosis and swap work.

Jan 10, 2015 | 2007 Chevrolet Equinox

2 Answers

How can i move a power seat that wont move


On these case go with the solved problems related to these issue.

Click the link below and follow the procedure:-----
1994 Lexus GS300: Power seat will not go back? http://howtobyme.blogspot.in/2012/05/1994-lexus-gs300-power-seat-will-not-go.html

-----------
1997 Toyota Avalon: Power Seat will not Move back? http://whatisbyme.blogspot.in/2012/05/1997-toyota-avalon-power-seat-will-not.html

----------
1998 Chevrolet Corvette: Power Seat Control Now Working? http://schematicsdiagram.blogspot.in/2012/04/1998-chevrolet-corvette-power-seat.html

-----------
Power seat will not go Forward http://repairhelpcenter.blogspot.com/2012/10/power-seat-will-not-go-forward.html

-----------
Replacing power adjustable bucket seats to both heated and cooled seats?

http://schematicsdiagram.blogspot.com/2011/12/replacing-power-adjustable-bucket-seats.html

-------------
Volvo Seat Removal with Heated Seats? http://schematicsdiagram.blogspot.in/2012/07/volvo-seat-removal-with-heated-seats.html

-------------

How to Remove Rear seat on Rover 600? http://repairhelpcenter.blogspot.com/2012/01/there-are-3-10mm-bolts-at-back-of-seats.html

---------
How to remove Seat? http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-seat-on-acura-integra.html

-----------
These will help.
Thanks.

Nov 23, 2012 | 1998 GMC Jimmy

1 Answer

The driver's side heated seat won't turn off on my 2003 Mecury Moutaineer. Also, how do I change my cabin filter?


Your vhicle build date is on a blue sticker on the driver door or door frame. If not there, check other doors.
The heated seat Module is under the seat. You can unplug the connector on it or the heated seat switch to shut it off. I supect the module is bad. get one used from car-parts.com. The cabin air filter is under the leaf screen at the base of the windshield. Remove wiper arms and leaf screen for access. Please rate, thanks. Principles of Operation - Heated Seats - Vehicles Built 03/2002 Onward
NOTE: Two heated seat modules are used, one for vehicles built up to 03/2002 and one for vehicles built 03/2002 onward. The modules are not interchangeable.
The driver and passenger heated seats share a common battery and ignition feed. A shared ground source supplies the heated seat control switches. When the heated seat control switch is pressed with the ignition switch in RUN or START, a momentary ground signal is sent to the heated seat module. The heated seat module then supplies power to the heating element circuit. The cushion element and seat backrest element are wired in series and powered by the same output. The heated seat module also will ground the separate indicator circuit at the dual automatic temperature control (DATC) module display panel to indicate an ON state. The heated seat module will remain on until the heated seat control switch is pressed and a momentary voltage signal is received, or until 10 minutes expire. If the ignition source is removed from the module, the heated seat module will enter an OFF state and will not return to ON until the switch is once again pressed with the ignition switch in RUN. The heated seat module is designed to heat the seat to 37.5?C (99.5?F) and maintain the temperature until time-out or switched off. This temperature is maintained by the heated seat module monitoring the temperature sensor located in the seat cushion element, and adjusting the current flow to the heating elements.
--------------------------------------------------------------------------------------------------------------------------------

May 22, 2011 | 2003 Mercury Mountaineer

3 Answers

Front heated seats will not turn on. checked for fuse but cant find any labeled for front heated seats? any ideas


First, please read this article: Where's The Fuse?

In order to obtain conclusive testing of the heated seat system, the Controller Area Network (CAN) data bus system must be checked.

The most reliable, efficient and accurate means to diagnose the heated seat system requires the use of a Scan Tool and the Service and Body Diagnostic Information.

Diagnostic logic is built in to the seat module and the instrument cluster (CNN) to help the person trying to locate the problem by the most efficient means possible. Anytime a problem is suspected, a Scan Tool should be obtained and used to retrieve any stored fault codes in the heated seat module and/or instrument cluster.

Feb 21, 2011 | 2007 Chrysler Aspen 4x2

1 Answer

98 Aurora's heated seat not working


Check your fuses first. Then check to see if you have power to the box under seat. It should be about 3x3 and black I think. If you have power to the box change the box. To check use a test light. make sure the key is on and the button is pushed then probe the wires going to the box. Hope this helps you.

Dec 04, 2009 | 1998 Oldsmobile Aurora

2 Answers

The driver seat heater just quit. all fuses are good. how do you tell if the relay is good?


Swap it with a relay you know to be good and see if it works again,pick a relay that is not important to the function of your car.

Nov 01, 2009 | 2004 Cadillac SRX

1 Answer

I need a wiring diagram for '94 volvo 8-way power seat


Could this be what you're looking for?
I'm a little bit confused as to what you mean by power seats... Do you mean heated seats or seats with electric motors for adjusting them? Anyways, the document linked to below has a circuit diagram of heated seats on page 43, as well as a lot of other components of an 850. Have a look, and good luck!

http://www.volvoclub.org.uk/tech/service/850/SystemWiringDiagrams.pdf

May 03, 2009 | 1994 Volvo 850

1 Answer

2003 Chrysler sebring wiring diagram for power and heated seats


Do some checking if you haven't already, the harness may already be there under carpet. If not, you may have to sweet talk a service guy at dealership for the print you need, or try www.alldata.com.

Mar 27, 2009 | 2003 Chrysler Sebring

Not finding what you are looking for?
1998 Chevrolet K1500 Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...