Question about 1995 Chrysler New Yorker

1 Answer

Signal Lights and hazard lights don't work.

The signal lights worked on the way out but not returning home. I have checked the fuses and they are OK for both the signal lights and the hazard lights. Does this car still have a flasher unit and if so where is it?

Thanks for your help.

Posted by on

  • elcscsd Dec 09, 2008

    I was doubtful that this was going to work but it did. Thanks.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 6,674 Answers

Try lower or under the dash on drivers side, in with fuses.

Posted on Dec 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hazard lights malfunction


YOU MIGHT HAVE A BURNT OUT RELAY IN FUSE COMPART UNDER YOU CARS HOOD CHECK THAT OUT THRU YOUR CARS MANUAL,IT WILL SHOW YOU WHICH RELAY IT IS?

May 24, 2013 | Cars & Trucks

1 Answer

2000 tacoma flashers don't work but turn sig do work!


The hazard switch gets power from the horn fuse which is hot all the time, and from the turn signal fuse which is hot when the key switch is on. The turn signal switch gets power from the hazard switch and both use the same flasher.
So if the turn signals work but the hazard switch does not power the lights, and both fuses have power, I would say the problem is inside the hazard switch.

Feb 19, 2013 | Cars & Trucks

1 Answer

Hazard warning light don't work


Its possibe that ypou have independient FLASHER device, one for hazard and one for turn signal; check backside of fuse panel and replace it.

Aug 28, 2012 | 1993 Plymouth Voyager

1 Answer

Turn signal lights don't work even though hazards do


Sound like a flasher device go to bad; check in fuse box and replace it to solve this problem.

Jun 11, 2012 | 2006 Chrysler Town & Country

1 Answer

How to fix turn signal on 86 Chevy Astro Van


you don`t say but do the lights work either on the front/back on both sides.if not then it may be a fuse that needs replacing or need a bulb replacement.if the lights work but don`t flash then it sounds like a signal flasher problem.the flasher is located in the fuse panel under the dash on the drivers side.if the hazard flashers work then turn them on to find the hazard flasher by the fuse panel then you will know what the signal flasher looks like and change the signal flasher.make sure you change the one for the signals and not the hazard one.if the hazards work then i would say the signal switch is good as the hazards work through the same switch.

Apr 21, 2011 | Chevrolet Astro Cars & Trucks

1 Answer

Why my emergency flashers work and my signal lights don't


the hazard lights use a different flasher(relay)then the signal lights.you don`t say if the signals work on one side or not,you should check the fuses for the signal lights in the fuse panel under the dash on the drivers side.if you put the hazards on and find the flasher then you will know what the signal flasher will look like,it is on the fuse panel and replace they should work.

Mar 18, 2011 | 2000 Buick LeSabre

1 Answer

Turn signal dosent work


you need to check to see which bulbs don`t work both front and back lights for the signal on the side it`s not working,you don`t say if any signals work or not if no signals work then you need to check the fuses under the dash on the driver`s side.now if it`s just one side then check the lights as mentioned above.if one isn`t then replace the bulb.if neither bulb is working then it sounds like the signal flasher is not working.turn on the hazard flashers and check the lights front and back.if all bulbs work then leave the hazards on and look under the dash for the flasher that is making the noise,this will show what the signal flasher will look like,then find the signal flasher on the fuse panel under the dash it should be located on the fuse panel.and replace

Mar 15, 2011 | 1997 Dodge Ram 1500 Club Cab

1 Answer

Turn signal does not work


Hi there,

I'm assuming neither of your turn signals work?

Firstly, check the 15A Turn fuse in the fuse box. If fuse is ok, then operate your HAZARD light function.

If no Hazard lights operate, then suspect a probelm with the Turn Signal Flasher unit.

If Turn signal flasher tests ok, then fault lies within the Turn switch.


"If this has helped you in any way, please rate this solution"

May 02, 2010 | 1998 Buick Riviera

Not finding what you are looking for?
1995 Chrysler New Yorker Logo

Related Topics:

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...