Question about 2005 Chevrolet Uplander

1 Answer

Remote starter try to use the remote starter and the alarm goes off RIGHT away and won't shut off til keys in ignition

Posted by on

  • 2 more comments 
  • Ray444 Feb 06, 2009

    I have the same problem on a 2005 Uplander. Hit the remote start button and the ALARM goes off instantly. (Doors shut tight and locked, also ckeck engine light off, no codes stored) I can shut off the alarm buy hitting the alarm button. I checked with the dealer a there are no progamming recalls or open bulletins

    Has anyone either fixed this problem or had it fixed?? What was involved and how much did it cost?? Thanks Ray

  • Anonymous Mar 24, 2014

    We no longer have the faub but when I put key in ignition, alarms goes off and won't quit.
    how can I get it to disarm?

  • Anonymous Mar 29, 2014

    alarm goes off by itself tried everything with the remote still didnt go off tried starting the jeep and shutting it off then the jeep kept running when i took the key out off the ignition

  • Anonymous Mar 29, 2014

    panic alarm will not shut off and tried the remote and still didn't shut off and tried starting the jeep and shut it off but the jeep continuos to run with out the key in the ignition

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 21 Answers

I worked as a chevy mechanic for many years, it sounds like your keyless entry module needs to be reprogrammed, only problem is, it takes a $4000 and a subscription to GM's service site. which most don't have, so its easier to just take it in to the dealer, however before they start working on it have them check for recalls on the programming, chevy releases reprograms on the computer systems every couple months to solve issues like this, if your van has an open reprogram on it, then the dealer will reprogram it for no charge. but make sure you have them check for open bulletins before they put any labor into finding the problem, you may get out with no bill at all if so.

Posted on Nov 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remote start works but shuts off right away


When you say right away....it is as soon as the vehicle starts....or is it 10-15-30 seconds later? Is this a factory remote start? If not, and you installed an aftermarket one, what is probably occurring is that your factory anti-theft system is seeing the vehicle running without the key in the ignition and activates the immobilizer which shuts down the vehicle. Aftermarket remote starts require adapter electronics to bypass the immobilizer until the operator enters the vehicle and inserts the key. This is why most aftermarket alarm systems are installed by trained pros.

Nov 05, 2013 | Dodge Grand Caravan Cars & Trucks

1 Answer

Changed my car battery on my 99 Avenger and the horn goes off and car won't start.


It sounds like you have an alarm system that is disabling the ignition. You need to reset the alarm system.

Apr 21, 2012 | Dodge Avenger Cars & Trucks

1 Answer

I have 2002 avalanch that won't start guy told me that it was remote start problems could that keep it from starting with the key?


what does it do? does it turn over will not fire? not turn over or turn over and die right away? need some more info before i can give more detailed advice, the remote start shouldnt hold it up unless its a alarm/starter with the starter disable active.

Sep 06, 2011 | Chevrolet Avalanche Cars & Trucks

1 Answer

2004 Hyundai Elantra won't start, emergency flashers keep blinking, can't shut off, lights dim, can't jump start, clicking from under dash from relays. What could it be?


The 'Keyless Entry & Burglar Alarm System" is activated. You must 'Disarm' the system using the Keyless Entry Remove (Key Fob) to "Reset" the system. The reason the engine won't start is due to the burglar alarm - it has a "Starter Kill" circuit which is activated when the alarm is activated. The alarm must be DEactivated to DEactivate the 'Starter Kill' circuit.
Another way to start the engine is to get in the car, put the key in the ignition and turn it to 'ON" and wait 3 to 5 minutes until the emergency flashers stop/turn off. Afterward, you should be able to start the engine. NOTE: This does NOT reset the burglar alarm. It will go off again when you enter the vehicle without using the remote/key fob.

Sep 06, 2011 | Hyundai Elantra Cars & Trucks

2 Answers

I have a 2003 hyundai sonata and i dont have the remote for the stock alarm. My alarm keeps going off and my car wont start. I bought a new battery and even tried the key in the door still no luck.....


The 2003 Sonata is equipped with a 'starter KILL' burglar alarm system with disables the starting system (using a N/C 'contacts' configuration instead of a N/O contacts configuration). N/C=Normally closed, and N/O=Normally open contacts. When the alarm goes off with a MY Sonata, the only way to DISARM it is with the key fob (remote) originally programmed for it (unless you purchase a new remote & have it programmed for the vehicle at an authorized Hyundai Service Department). NOTE: So long as the keyless entry & burglar alarm system is functioning/operating normally, the alarm will keep going off and the STARTER KILL function will still prevent you from starting the vehicle. One option is left without purchasing a new remote and having it programmed.
1. When the alarm goes off, get into the vehicle and insert the ignition key into the ignition.
2. Turn the key to the 'RUN' position (NOT the ACC position) and wait for the alarm to STOP (usually about 3 to 5 minutes).
3. The engine should then start using the ignition key.

If this procedure doesn't work, the problem will need further diagnosis by a qualified/certified Hyundai Service Technician.

Hope this helps

Aug 27, 2011 | 2003 Hyundai Sonata

2 Answers

2000 hyundai elantra alarm goes off where is the


There is NO kill switch on the 2000 Elantra... HOWEVER, there is a thing called the Key Fob (keyless remote entry system). There is, however, a system in place called the 'starter kill' circuit and it is activated when the burglar alarm goes off.... it's called the burglar alarm relay and it is activated to prevent the engine starter system from being used. There are three ways to get the engine started in such a circumstance... 1. use the key fob to 'disarm' the system... 2. put the key in the ignition and turn it to the 'RUN" position and wait until the alarm stops (horn stops beeping and the parking lights stop flashing), then the engine will start.... 3. pull the starter relay from the UnderHood junction box and bypass the starter circuit (key in ignition and in the 'RUN' position), jumper the starter solenoid circuit to energize the solenoid to start cranking the engine -- it should start then.

Oct 03, 2009 | 2000 Hyundai Elantra

1 Answer

2000 pontiac GranPrix has no spark, cranks all day long


If the after market alarm system isn't completely removed from the vehicle and the car restored back to where it was prior to the alarm, the alarm system will think someone is trying to steel the car and has shut down the signal from the PCM.
The alarm needs to completely removed.
Once the alarm has been removed, I would use a GM ignition key, you may need to tow the car to your local GM dealer to make a new ignition key and program the key to match the PCM, it's possible the vehicle ant-theft system has shut down the electrical because of the incorrect ignition key.

Apr 18, 2009 | 2000 Pontiac Grand Prix

1 Answer

Changed the battery. The alarm went off, tried to reset but will not work. When driving push on the brakes and the car shut down. Is this an alarm issue or an electrical engine issue. Don't know what to...


Yes this is an Alarm issue that's why your vehicle is shutting down as soon as you press on the brake pedal. Is this an aftermarket alarm or stock alarm? Sounds like aftermarket alarm to me and if it is, the way fix this issue is as soon as you put the red n black terminal on the battery and the alarm goes off press your alarm key right away to turn it off. If this doesn't work put your key on the ignition after you have installed the battery and just put it on the "ON" position engine OFF then click on your alarm remote once again.

Sep 23, 2008 | Mitsubishi Eclipse Cars & Trucks

Not finding what you are looking for?
2005 Chevrolet Uplander Logo

645 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...