Question about 2003 GMC Yukon XL

1 Answer

The horn does not honk anymore?

Whenever i push my horn it doesn't honk and i don't know how to fix it with out going to a car repairman can i do it myself and how

Posted by on

  • Anonymous Apr 17, 2009

    whenever i push my horn it doesn't honk and i don't know how to fix it
    with out going to a car repairman can i do it myself and how?

    My car Nissan Sentra 2001 Model


×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 566 Answers

Hi from the uk first thing to check is fuse? in fuse/relays box if you check handbook it will identify location and amp of fuse? if fuse ok? then find horn and check wire connection is clean/secure then have someone hold horn button on whilst you tap the actual horn body? if horn works momentarily then ? the horn is faulty you can obtain horn from motor stores not dealers if you want to ? and diy the job no problem if horn is not readily visible ? check under front wheel arches? and in font of radiator below front cross member brace above rad n/s or o/s? hope one of these suggestions help you and inspires to diy best wishes from uk

Posted on Nov 09, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Saturn Keep blowing horn fuse


Could be a short in the steering wheel or column. Or a faulty horn relay.
You may need a wiring diagram to trace the circuits from the relay.
Usually the black wire is the ground and the green is voltage from the relay.

Dec 18, 2012 | Cars & Trucks

1 Answer

I have a 2007 ford explorer, when i step on the gas the truck barely goes until i get to about 20-30 mph then it will go faster. So I just went to advanced auto's to get the vehicle scanned and it came...


no real speed until 20 mph indicates your transmission is starting in 2nd gear. this would be the ab/c solenoid code. try starting off and manually pulling the shift lever down into 1 at approx 15mph bump it to 2 then at 20 25 bump to drive, if trans shifts under these conditions, you do have a bad solenoid, some solenoids can be replaced just by removing trans pan, without removing valve body. DW Mylin

Nov 24, 2012 | Cars & Trucks

1 Answer

My horn doesn't honk and alarm doesn't beep how to fix?


It should still be under warranty.
Could be the horn or the relay.

Sep 26, 2012 | 2010 Honda Civic

1 Answer

Horn randomly honks(very annoying while your trying to sleep) HELP!


its possible that the relay is the problem as most relays have a second power feed wire,if it shorts to the horn side of the relay it can blow the horn.doesn`t happen very often but it does happen.this could explain the horn blowing without the fuse in.you can get a door key made at a lock smith to solve that problem.

Nov 17, 2011 | 1994 Buick LeSabre

1 Answer

I replaced the turn signal switch on my 93 chevy s10 and when i went to put it all back together, i broke the horn contact ring putting on the steering wheel. When I reconnected the battery, the horn...


the little contact could have bent and is sitting on the ring, you may have to bend it so it only makes contact when you push on the horn pad. things should fit easily if the force it things can get bent out of their original shape and cause issues.

Apr 25, 2017 | 1993 Chevrolet S-10

1 Answer

2000 Lincoln LS HOrn does not work and I already checked the fuses asd they appear to be good. Can you provide any other trouble shoot solutions?


easy check first ,, you need help,, disconnect the 2 wires at the horn itself, Located by the front gill under the hood,, use a multimeter to check for power,, have someone try and honk the horn to see if the horn itself is receiving power, if it is,, the horn went bad, if not,, the contacts in the horn contacts are bad, which doesn't happen often but it does happen, or ( and I don't know on your model, ) you may have a horn relay thats not working, I'll check more to see if I can locate that answer

Jun 06, 2011 | 2000 Lincoln LS

1 Answer

Where can I find my honk sensor in a 2006 Ford Focus? or How to fix my honk in a 2006 Ford focus? The honk is not working?


I believe there are 2 wires to the horn. One is power all the time, and the other is ground through the steering column wire to the horn button on the steering wheel, when it grounds out when pushed.
If it is a single wire to the horn, then there is a relay.

May 05, 2011 | Ford Focus Cars & Trucks

1 Answer

My car wont honk... help please


neither do i honk anymore ,its known as old age and things go wrong ,so try checking for power to the horn first then go from their ,like no power to horn ?why not ,and if power to horn i? is the horn working

Mar 05, 2011 | 2004 Scion xB

Not finding what you are looking for?
2003 GMC Yukon XL Logo

528 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

77514 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...