Question about 2003 Jeep Wrangler

1 Answer

2003 jeep wrangler transmission problem

I have a 2003 jeep wrangler and today i was 4-wheeling in it and all of a sudden it like went into neutral...I took it out of 4 wheel drive and i didnt have 2 wheel drive so i put it back in 4 wheel drive and drove it home. So what would cause this to happen? i can sit hold the brake and shift through the gears with out the clutch.

Posted by on

  • mickey_mvp Nov 09, 2008

    I looked there and its all still connected. I think maybe a gear may be broke. What do you think?

  • mickey_mvp Nov 10, 2008

    Yeah it made a pop i thought it was a u-joint but i really dont know

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 393 Answers

Look under vehicle and make sure drive shaft going to back of truck is still there and connected. if it is there is a problem w/transfercase.

Posted on Nov 09, 2008

  • darin brown Nov 09, 2008

    did you hear any kind of noises?

  • darin brown Nov 11, 2008

    have a reputable tranny shop take a look at it/poss output shft prob.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1992 Jeep Wrangler 4 x 4 system not working


it is in the tranfer case because you can't get it in 4x4 at all
now if it went in 4x4 drive and the front wheels don't engauge its the front end

Mar 06, 2010 | 1992 Jeep Wrangler

1 Answer

How to replace fog light bulb on an '03 Jeep


There is a small square "trap door" in each wheel well directly behind the fog lamps. You can pry it open and access the fog lamps. They just twist loose.

Feb 11, 2010 | 2003 Jeep Wrangler

1 Answer

Stuck in 4 Wheel Drive Gear 1989 Jeep Wrangler was stuck in sand. Shifted to 4 wheel drive and now cannot switch back to AWD. Any suggestions?


Assume that is stuck in 4wd, cannot shift back to 2wd. Have you tried shifting to 4wd/Lo and back? Try letting out on the clutch while slowly rolling?

Assume you are manual transmission?

Jul 30, 2009 | 1988 Jeep Wrangler

1 Answer

1992 jeep yj transfercase swap


did you put transmission fluid back in the trans?

Feb 09, 2009 | 1992 Jeep Wrangler

1 Answer

1998 Jeep wrangler s/spot stuck in 4 wheel drive


This sounds like the linkage could have fallen or broken off. Have someone move the 4wd shifter while you look under the vehicle.

Feb 06, 2009 | 1998 Jeep Wrangler

1 Answer

2003 Wrangler Tire buying dilemma.


1) If you want performance in the rain, you need an all season tire.
2) I had 31x10.5 on my Jeep.
3) The vibration could be a bad steering damper.
4) Dana rears are almost ablong shaped on the cover. The other is perfect round shape cover.
5) Tell your wife the Jeep is for her.

Nov 18, 2008 | 2003 Jeep Wrangler

1 Answer

1998 jeep wrangler


shift tranny from 1st-3rd if engine revs up clutch needs replacing

Nov 01, 2008 | 2003 Jeep Wrangler

2 Answers

Hi there. I have a 1997 Jeep Wrangler TJ Automatic (Hard Top.) Yesterday after being in the snow the transmission started to act up on the way home. It was holding gears to long sometimes and it even took...


You may have gotten some snow it the connector for the TCM ( transmission control Module) computer for the transmission, or you may have pulled a wire off from the bottom of the vehicle check for any loose wiring harness connectors on the Transmission.
If you find tis information helpful please geve me a good rating
Thank you ,Randy

Aug 10, 2008 | 1997 Jeep Wrangler

Not finding what you are looking for?
2003 Jeep Wrangler Logo

Related Topics:

326 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...