Question about 2003 Mazda Mazda6

1 Answer

Driving light how do you replace the driving light in the headlight assembly in the 2003 mazda 6

Posted by on

  • yadayada
    yadayada May 11, 2010

    What do you refer to?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

If it's the same as my 2006 there is a seperate bulb in the upper inside corner of the high beam section of the light assembly. From behind..you twist and pull it out. Be careful not to touch the blub as this will greatly shorten the life if the bulb. (oils and dirt from your hands make it heat up alot hotter than normally)

Posted on Jun 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace little light inside headlight assembly on 03 mazda mpv?


I had one of these vans. They are fantastic for space, but commonly have electrical issues. The head lights are a single unit, and if you want to replace a bulb, the Whole unit has to be removed. There are several screws located on the top and bottom of the unit, that must come out. Then it slides out easily. Replace your bulb/s then reverse.

Aug 29, 2014 | 2003 Mazda MPV

1 Answer

Replacing headlight assembly


check behind your turnsignal indicator light sometimes there is also one or more screws there hope this helps

Mar 29, 2014 | 2003 Mazda Protege

1 Answer

How to replace other bulb in headlight assembly


what kind of car is this ?
sometimes like in FORD you have to remove the light housing to get to bulbs?

Sep 20, 2012 | 2003 Mazda MPV

1 Answer

2003 mazda tribute daytime running lights flicker when on and go away when full lights are on.


we just replaced the alternator in our 2003 mazda tribute then we were driving it at night and the headlights,dash lights were flickering as if ready to go out.....need help what to do

Jun 17, 2010 | 2001 Mazda Tribute

2 Answers

Need to change headlight on 2003 mazda rx 6


If it is the headlight itself. There may be a cover or shroud on the front of the engin bay. Remove that, may be a combination of clips and screws. If it does not cever the light area, it is even easier. There will probably be 3 screws or nuts, remover these and unplug the electrical to the light. From there you should just be able to pop the light out of place. If you are just replacing the bulbs. Where the power goes into the assembly, turn the clip, may be grey in color and pull out of the headlight assembly and replace the light bulb. But don't touch the new bulb the oils from your skin will damage the bulb.

Apr 22, 2009 | 1994 Mazda MX-6

1 Answer

Head lights on 2003 Mazda 6 keep burning out


Are you touching the bulb when you putting it in ? Don't.

Mar 20, 2009 | 2003 Mazda Mazda6

1 Answer

Change fog light bulbs in Mazda 6


Hi, I have a 2003 Mazda 6 which also has the fog light in the headlight assembly. I'm not sure but I would imagine the design is similar to yours. I had the left side blown and it took me roughly 10 minutes to get the bulb out. The cover on the back of the assembly has a push tab in the centre at the top and two locating tabs on the bottom. I had to push down fairly hard on the air filter side of the top tab while at the same time carefully levering the cover off with a flat blade screwdriver. There isn't a lot of room between the headlight and the air filter box but just enough that you can tilt the back cover over a bit and lift it straight up, out from the bottom locating tabs. Pull this cover right out and then you can see inside the back of the headlight assembly. The bulb has a wire retainer clip that you can push in with your fingers to unhook it and hinge it over. You may have to pull a wire terminal off to get at this clip better.You can now just pull the bulb out and remove the approx 5cm wire tail on the bulb out from it's terminal. Should be able to get a replacement bulb just about anywhere. Replacement would be the opposite only be careful not to touch the glass of the bulb with your fingers as this is detrimental to the life of the bulb. Don't forget to put the other wire terminal back on if you had to remove it. As far as the right side goes, I have never replaced the fog light but I have replaced the headlight bulbs which are also behind this cover so it should be possible. It was a while ago for that but if I remember rightly, I had to use a little mirror sometimes on the right headlight-bit of a pain. By the way, unlike me, before you ever replace a headlight bulb, check that the fuse isn't blown first. There is a fuse for low and high beam for both left and right headlights. I don't think that is the case with the fog lights. Hope this helps you or whoever else.
Cheers,Peter.

Feb 28, 2009 | 2006 Mazda 6

1 Answer

Mazda 6 2.3 sport 2002 headlights


If your car and headlights are off then you will not get a shock. You have to unplug the bulb to replace it anyway so there is no way for you to get shocked.

Dec 03, 2008 | 2003 Mazda Mazda6

1 Answer

Headlight retractor


The gears that drive the light to open are worn out, you will need to replace the head light motor assembly, this is common isuue with pop up motorized headlights.

Aug 06, 2008 | 1990 Mazda MX-5

Not finding what you are looking for?
2003 Mazda Mazda6 Logo

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...